EUVIMEDEUVIMED entdecken
Crossref

Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process

Ranjeet Kumar Singh, Ramesh Chandra Singh

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science · 2025-12 · 239 (24) · 9965-9981

DOI: 10.1177/09544062251376844 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, online erschienen am 04.10.2025. Verfasst von Ranjeet Kumar Singh und 1 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the dry sliding wear behaviour of Al7075-T6 matrix composites reinforced with various weight percentages (8–16 wt. %) of nano-sized boron carbide particles. The composites were fabricated using the stir-casting technique. Wear tests were carried out using a pin-on-disc tribometer. The process parameters considered were load (10–50 N), sliding speed (1.5–3.5 m/s), and sliding distance (800–1200 m), and these were optimized using the Taguchi method. The results showed that the highest wear loss of 3.146 mm 3 /km occurred at 8 wt. % B 4 C, while the lowest wear loss of 1.203 mm 3 /km was observed at 16 wt. % B 4 C under optimal conditions. Hardness increased by 11.08% as the reinforcement level rose from 8 wt. % to 16 wt. %, and the ultimate tensile strength improved by 2.88%. Regression modelling exibited high predictive accuracy (R 2 = 95.92%). The optimal combination of parameters was 16 wt. % B 4 C, 10 N load, 1.5 m/s sliding speed, and 800 m sliding distance, which resulted in the minimum wear loss, with validation showing only 1.23% error. These composites are suitable for demanding applications where high wear resistance is essential, such as automotive brake rotors, aerospace bushings, and military structural components.

Zitieren

APA

Singh, R. K., & Singh, R. C. (2025). Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 239(24), 9965-9981. https://doi.org/10.1177/09544062251376844

Vancouver

Singh RK, Singh RC. Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science. 2025;239(24):9965-9981. doi:10.1177/09544062251376844

BibTeX
@article{Singh2025,
  author = {Singh, Ranjeet Kumar and Singh, Ramesh Chandra},
  title = {Optimization of process parameters to minimize the wear loss of Al7075 T6/B4C composites developed by stir casting process},
  journal = {Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science},
  year = {2025},
  volume = {239},
  number = {24},
  pages = {9965--9981},
  doi = {10.1177/09544062251376844}
}
Kostenlos starten →