Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route
High Performance Polymers · 2024-03 · 36 (2) · 130-140
DOI: 10.1177/09540083231224608 ↗Kurz gefasst
Fachartikel in der Zeitschrift High Performance Polymers, online erschienen am 28.12.2023. Verfasst von Mukesh Kumar und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 47 Literaturangaben.
Abstract (Originalsprache)
Poly(ether-ketone)/fly ash (FA) composites reinforced with 0-30 wt% FA were fabricated using ball milling followed by hot compaction. The composites were investigated for mechanical and viscoelastic properties. Scanning electron microscopy revealed excellent dispersion and good adhesion of FA particles with the matrix. The addition of FA increased the microhardness by 70% and the storage modulus (below glass transition) by 75%. The reinforcing efficiency was better above the glass transition, which increased to around 177% at 250°C. This research indicates that the FA can be used as an alternative reinforcement of costly ceramic powder for the electronic packaging substrate or printed circuit board applications.
Zitieren
APA
Kumar, M., Goyal, R., & Sharma, S. (2024). Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route. High Performance Polymers, 36(2), 130-140. https://doi.org/10.1177/09540083231224608
Vancouver
Kumar M, Goyal R, Sharma S. Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route. High Performance Polymers. 2024;36(2):130-140. doi:10.1177/09540083231224608
BibTeX
@article{Kumar2024,
author = {Kumar, Mukesh and Goyal, RK and Sharma, S},
title = {Viscoelastic behaviour of poly(ether-ketone)/fly ash composites fabricated by powder metallurgical route},
journal = {High Performance Polymers},
year = {2024},
volume = {36},
number = {2},
pages = {130--140},
doi = {10.1177/09540083231224608}
}
EUVIMED