EUVIMEDEUVIMED entdecken
Crossref

Investigation on buckling resistance of the stringer-panel structure with variable stiff laminate

Mehmet Emre Öz, Paşa Yayla

Journal of Reinforced Plastics and Composites · 06.11.2026

DOI: 10.1177/07316844261506695 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Reinforced Plastics and Composites, online erschienen am 06.11.2026. Verfasst von Mehmet Emre Öz und 1 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Improving the elastic stability of composite materials is essential for aerospace structural components. Most research on variable-stiffness laminates (VSLs), enabled by automated fiber placement (AFP), has focused on flat, unstiffened plates with simplified boundary conditions, and few studies have applied VSLs to stiffened panels representative of aircraft fuselage or wing structures. This study investigates the buckling behavior of an experimentally validated stringer-stiffened panel by implementing VSLs exclusively in the two plies adjacent to the mid-plane of its 22-ply symmetric skin. This approach tailors the in-plane stiffness while preserving the bending stiffness and the baseline stacking sequence. Linear eigenvalue buckling analyses showed that the varying the fiber angle increased the first buckling load by 12.5% relative to the straight-fiber design, and modifying the fiber-path formulation to a third-order polynomial increased the improvement to 18.2% without any mass penalty. This improvement results from the redistribution of compressive load from the critical central skin bay toward the stringers. These findings show that localized stiffness tailoring of selected plies provides a practical route to AFP-based design of lightweight, high-performance, stiffened aerospace structures.

Zitieren

APA

Öz, M. E., & Yayla, P. (2026). Investigation on buckling resistance of the stringer-panel structure with variable stiff laminate. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844261506695

Vancouver

Öz ME, Yayla P. Investigation on buckling resistance of the stringer-panel structure with variable stiff laminate. Journal of Reinforced Plastics and Composites. 2026. doi:10.1177/07316844261506695

BibTeX
@article{z2026,
  author = {Öz, Mehmet Emre and Yayla, Paşa},
  title = {Investigation on buckling resistance of the stringer-panel structure with variable stiff laminate},
  journal = {Journal of Reinforced Plastics and Composites},
  year = {2026},
  doi = {10.1177/07316844261506695}
}
Kostenlos starten →