EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Impact Resistance of a Fiber Metal Laminate Skin Bio-Inspired Composite Sandwich Panel with a Rubber and Foam Dual Core

Wenping Zhang, Ruonan Li, Quanzhan Yang, Ying Fu, Xiangqing Kong

Materials · 03.01.2023 · 16 (1) · 453

DOI: 10.3390/ma16010453 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.01.2023. Verfasst von Wenping Zhang und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Civil Engineering, Liaoning University of Technology, Jinzhou 121001, China. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Guangdong Major Project of Basic and Applied Basic Research, Basic Scientific Research Project of Education Department of Liaoning Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper reports the development of a novel bio-inspired composite sandwich panel (BCSP) with fiber metal laminate (FML) face sheets and a dual core to improve the low-velocity impact behavior based on the woodpecker’s head layout as a design template. The dynamic response of BCSP under impact load is simulated and analyzed by ABAQUS/Explicit software and compared with that of the composite sandwich panel (CSP) with a single foam core. The impact behavior of BCSP affected by these parameters, i.e., a different face sheet thickness, rubber core thickness and foam core height, was also reported. The results show that BCSP has superior impact resistance compared to CSP, with a lower damage area and smaller deformation, while carrying a higher impact load. Concurrently, BCSP is not highly restricted to any particular region when dealing with stress distributions. Compared to CSP, the bottom skin maximum stress value of BCSP is significantly reduced by 2.4–6.3 times at all considered impact energy levels. It is also found that the impact efficiency index of BCSP is 4.86 times higher than that of CSP under the same impact energy, indicating that the former can resist the impact load more effectively than the latter in terms of overall performance. Furthermore, the impact resistance of the BCSP improved with the increase in face sheet thickness and rubber core thickness. Additionally, the height of the foam core has a notable effect on the energy absorption, while it does not play a significant role in impact load. From an economic viewpoint, the height of the foam core retrofitted with 20 mm is reasonable. The results acquired from the current investigation can provide certain theoretical reference to the use of the bio-inspired composite sandwich panel in the engineering protection field.

Schlagwörter

Stichwörter der Autor:innen

FMLbio-inspired composite sandwich paneldual-corefinite element analysisimpact resistancelow-velocity impact

Autor:innen und Institutionen

  • School of Civil Engineering, Liaoning University of Technology, Jinzhou 121001, China.
  • School of Material, Shenyang Ligong University, Shenyang 110000, China.
  • Songshan Lake Material Laboratory, Dongguan 523808, China.

Förderung

  • Guangdong Major Project of Basic and Applied Basic Research
  • Basic Scientific Research Project of Education Department of Liaoning Province

Zitieren

APA

Zhang, W., Li, R., Yang, Q., Fu, Y., & Kong, X. (2023). Impact Resistance of a Fiber Metal Laminate Skin Bio-Inspired Composite Sandwich Panel with a Rubber and Foam Dual Core. Materials, 16(1), 453. https://doi.org/10.3390/ma16010453

Vancouver

Zhang W, Li R, Yang Q, Fu Y, Kong X. Impact Resistance of a Fiber Metal Laminate Skin Bio-Inspired Composite Sandwich Panel with a Rubber and Foam Dual Core. Materials. 2023;16(1):453. doi:10.3390/ma16010453

BibTeX
@article{Zhang2023,
  author = {Zhang, Wenping and Li, Ruonan and Yang, Quanzhan and Fu, Ying and Kong, Xiangqing},
  title = {Impact Resistance of a Fiber Metal Laminate Skin Bio-Inspired Composite Sandwich Panel with a Rubber and Foam Dual Core},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {453},
  doi = {10.3390/ma16010453}
}
Kostenlos starten →