EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Equivalent biaxial strain evaluation in small punch testing using acoustic emission

Rhys Pullin, Ifan Jenkins, Anghel Cernescu, Allen Edwards

The Journal of Strain Analysis for Engineering Design · 2021-04 · 56 (3) · 173-180

DOI: 10.1177/0309324720944067 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Strain Analysis for Engineering Design, online erschienen am 30.07.2020. Verfasst von Rhys Pullin und 3 weiteren Autor:innen. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 20 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: horizon 2020.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The small punch test initially used mainly in the nuclear sector proved to be an efficient method of estimating the mechanical properties of materials, including fracture toughness. In general, the fracture toughness is estimated based on a correlation with equivalent biaxial fracture strain. However, the latter depends on knowing the onset of the unstable fracture. In this article, the acoustic emission technique is used within the small punch test for estimating the unstable fracture initiation and determining the corresponding punch displacement from the load–displacement curve. Although, the acoustic emission signal can be slightly altered due to the location of the sensor, the results confirm the potential of the acoustic emission technique for detecting the onset of the unstable cracking and thus accurately estimating the equivalent biaxial fracture strain. The accumulated energy during the small punch test is one of the relevant acoustic emission parameters in estimating the fracture onset since it can be associated with the accumulated strain energy released by the deformed material.

Förderung

  • horizon 2020

Zitieren

APA

Pullin, R., Jenkins, I., Cernescu, A., & Edwards, A. (2021). Equivalent biaxial strain evaluation in small punch testing using acoustic emission. The Journal of Strain Analysis for Engineering Design, 56(3), 173-180. https://doi.org/10.1177/0309324720944067

Vancouver

Pullin R, Jenkins I, Cernescu A, Edwards A. Equivalent biaxial strain evaluation in small punch testing using acoustic emission. The Journal of Strain Analysis for Engineering Design. 2021;56(3):173-180. doi:10.1177/0309324720944067

BibTeX
@article{Pullin2021,
  author = {Pullin, Rhys and Jenkins, Ifan and Cernescu, Anghel and Edwards, Allen},
  title = {Equivalent biaxial strain evaluation in small punch testing using acoustic emission},
  journal = {The Journal of Strain Analysis for Engineering Design},
  year = {2021},
  volume = {56},
  number = {3},
  pages = {173--180},
  doi = {10.1177/0309324720944067}
}
Kostenlos starten →