EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

In Situ Punch–Shear Testing of Polymers

David Munoz-Paniagua, Ahmed Hammami iD, Hadi Nazaripoor, Abderrazak Traidia, Jorge Palacios Moreno iD, Pierre Mertiny iD

Polymers · 04.04.2025 · 17 (7) · 981

DOI: 10.3390/polym17070981 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 04.04.2025. Verfasst von David Munoz-Paniagua und 5 weiteren Autor:innen. Beteiligte Einrichtung: Department of Mechanical Engineering, University of Alberta, 9211-116 St, Edmonton, AB T6G 1H9, Canada. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Sciences and Engineering Research Council of Canada, Mitacs.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Conventional material aging and testing protocols involve exposing coupon samples to saturation in application fluid(s) at temperature and pressure conditions typically encountered during service, followed by mechanical testing at ambient conditions. This practice can generate misleading results for materials for which fluid ingress is rapidly reversible, most notably at elevated temperatures. A recently developed in situ punch–shear device has been successfully used to establish experimental correlations between the tensile properties (ASTM D638) and shear properties (ASTM D732) of Polyethylene of Raised Temperature (PERT) under dry conditions. It also enabled measurement of shear properties of select polymers while immersed (saturated) in fluids at elevated pressure and temperature. The present work extends the treatment to a suite of commercially available thermoplastic polymers spanning the commodity, engineering, and high-performance polymer grades with varying degrees of hygroscopicity. The objectives of this contribution are three-fold, namely: (i) assess the effect of sample preparation method on measured mechanical properties, (ii) compare the experimentally established correlations between shear and tensile tests for the different class of polymer grades before fluid exposure, and (iii) gauge reversibility of the measured tensile and shear properties after aging in deionized water to saturation at 95 °C. Results indicate that (i) the test coupon preparation method affects the tensile to shear correlation and must be standardized to enable systematic comparison of in situ properties, (ii) individual correlations segregate by polymer family, and (iii) conventional tensile testing after a saturation–dehydration cycle yields optimistic mechanical properties.

Schlagwörter

Stichwörter der Autor:innen

agingin situ propertiespunch–shear testingreversibilitysaturationtensile testingthermoplastic polymers

Autor:innen und Institutionen

  • Department of Mechanical Engineering, University of Alberta, 9211-116 St, Edmonton, AB T6G 1H9, Canada.
  • Mattr Corp, Flexpipe, 3501 54 Ave SE, Calgary, AB T2C 0A9, Canada.
  • Saudi Aramco, Research and Development Center, P.O. Box 62, Dhahran 31311, Saudi Arabia.

ORCID-Profile: Ahmed Hammami, Jorge Palacios Moreno, Pierre Mertiny

Förderung

  • Natural Sciences and Engineering Research Council of Canada
  • Mitacs

Zitieren

APA

Munoz-Paniagua, D., Hammami, A., Nazaripoor, H., Traidia, A., Palacios Moreno, J., & Mertiny, P. (2025). In Situ Punch–Shear Testing of Polymers. Polymers, 17(7), 981. https://doi.org/10.3390/polym17070981

Vancouver

Munoz-Paniagua D, Hammami A, Nazaripoor H, Traidia A, Palacios Moreno J, Mertiny P. In Situ Punch–Shear Testing of Polymers. Polymers. 2025;17(7):981. doi:10.3390/polym17070981

BibTeX
@article{MunozPaniagua2025,
  author = {Munoz-Paniagua, David and Hammami, Ahmed and Nazaripoor, Hadi and Traidia, Abderrazak and Palacios Moreno, Jorge and Mertiny, Pierre},
  title = {In Situ Punch–Shear Testing of Polymers},
  journal = {Polymers},
  year = {2025},
  volume = {17},
  number = {7},
  pages = {981},
  doi = {10.3390/polym17070981}
}
Kostenlos starten →