Study on the wettability behaviour between electroslag remelting slag and inclusions
Ironmaking & Steelmaking: Processes, Products and Applications · 2025-10 · 52 (8) · 893-901
DOI: 10.1177/03019233251350784 ↗Kurz gefasst
Fachartikel in der Zeitschrift Ironmaking & Steelmaking: Processes, Products and Applications, online erschienen am 24.06.2025. Verfasst von Junwei Dong und 4 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
The wettability between electroslag remelting (ESR) slag and non-metallic inclusions influences inclusion removal efficiency. This study establishes two models that quantify the wettability between two inclusions and the content of CaF 2 in ESR slags. Three ESR slags with CaF 2 content in the range from 30 to 70 wt-% were tested using the sessile drop method, and two inclusions, calcium hexaaluminate (CA 6 ) and Al 2 O 3 are used as substrates. Linear models were developed, correlating the apparent contact angle with CaF 2 content in the slag. Industrial tests were also performed. Results revealed that increasing CaF 2 content reduces the apparent contact angle for both inclusions. The apparent contact angle between CA 6 and the slag consistently exceeded the angle between Al 2 O 3 and the slag. These findings indicate that higher CaF 2 content increases the resistance for inclusions to enter the slag, with CA 6 having a higher tendency to enter the slag compared to Al 2 O 3 .
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Dong, J., Jiang, Z., Fang, J., Li, W., & Sun, C. (2025). Study on the wettability behaviour between electroslag remelting slag and inclusions. Ironmaking & Steelmaking: Processes, Products and Applications, 52(8), 893-901. https://doi.org/10.1177/03019233251350784
Vancouver
Dong J, Jiang Z, Fang J, Li W, Sun C. Study on the wettability behaviour between electroslag remelting slag and inclusions. Ironmaking & Steelmaking: Processes, Products and Applications. 2025;52(8):893-901. doi:10.1177/03019233251350784
BibTeX
@article{Dong2025,
author = {Dong, Junwei and Jiang, Zhouhua and Fang, Jiaqi and Li, Wanming and Sun, Changliang},
title = {Study on the wettability behaviour between electroslag remelting slag and inclusions},
journal = {Ironmaking & Steelmaking: Processes, Products and Applications},
year = {2025},
volume = {52},
number = {8},
pages = {893--901},
doi = {10.1177/03019233251350784}
}
EUVIMED