EUVIMEDEUVIMED entdecken
Crossref

Influence of slag composition on the cleanliness of electroslag ingot during low frequency electroslag remelting

Haowen Li, Yu Wang, Qian Hu, Bingjie Wang, Longfei Yao, Lizhong Chang, Xiaofang Shi

Metallurgical Research & Technology · 2025 · 122 (3) · 303

DOI: 10.1051/metal/2025019 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metallurgical Research & Technology, online erschienen am 02.04.2025. Verfasst von Haowen Li und 6 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 40 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Natural Science Foundation of Anhui Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electroslag remelting (ESR) experiments were performed on 304L austenitic stainless steel using a laboratory-scale low-frequency electroslag furnace with Al 2 O 3 -CaO-CaF 2 and Al 2 O 3 -CeO 2 -CaF 2 slags of varying compositions. The study aimed to evaluate the influence of slag composition on the oxygen and nitrogen content, as well as the number, size, and types of inclusions in ESR ingots under low-frequency power supply conditions. The results demonstrated that, under low-frequency conditions, increasing the CaO or CeO 2 content while decreasing Al 2 O 3 in the slag significantly reduced the oxygen content in the ingots. Among the slag components, CaO exhibited a markedly stronger deoxidation effect than CeO₂ under identical conditions. Regardless of slag type, the nitrogen content in the ingots remained stable. In the Al 2 O 3 -CaO-CaF 2 system, higher CaO content decreased the number and size of inclusions and shifted their type from Al 2 O 3 to aluminum-calcium composite inclusions. Similarly, in the Al 2 O 3 -CeO 2 -CaF 2 system, a 15% CeO₂ content reduced the inclusion size and number, leading to the formation of cerium-containing composite inclusions. The micro-electrolysis of slag components under low-frequency power supply was identified as the primary mechanism influencing inclusion characteristics, with slag stability playing a pivotal role in determining inclusion distribution and number in the ingots. Consequently, careful slag composition selection is essential for optimizing low-frequency ESR processes.

Förderung

  • National Natural Science Foundation of China
  • Natural Science Foundation of Anhui Province

Zitieren

APA

Li, H., Wang, Y., Hu, Q., Wang, B., Yao, L., Chang, L., & Shi, X. (2025). Influence of slag composition on the cleanliness of electroslag ingot during low frequency electroslag remelting. Metallurgical Research & Technology, 122(3), 303. https://doi.org/10.1051/metal/2025019

Vancouver

Li H, Wang Y, Hu Q, Wang B, Yao L, Chang L, et al. Influence of slag composition on the cleanliness of electroslag ingot during low frequency electroslag remelting. Metallurgical Research & Technology. 2025;122(3):303. doi:10.1051/metal/2025019

BibTeX
@article{Li2025,
  author = {Li, Haowen and Wang, Yu and Hu, Qian and Wang, Bingjie and Yao, Longfei and Chang, Lizhong and Shi, Xiaofang},
  title = {Influence of slag composition on the cleanliness of electroslag ingot during low frequency electroslag remelting},
  journal = {Metallurgical Research & Technology},
  year = {2025},
  volume = {122},
  number = {3},
  pages = {303},
  doi = {10.1051/metal/2025019}
}
Kostenlos starten →