EUVIMEDEUVIMED entdecken
Crossref

Tialn/AlCrN coatings in dry turning of Inconel 718

Venkatesh Ramamoorthi

Surface Engineering · 17.11.2026

DOI: 10.1177/02670844261508237 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 17.11.2026. Verfasst von Venkatesh Ramamoorthi. Die Arbeit nennt 36 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Inconel 718 is difficult to machine because its high-temperature mechanical strength and low thermal conductivity intensify thermo-mechanical loading at the cutting edge. This experimental study examines flank wear and material removal rate (MRR) during dry longitudinal turning with commercial TiAlN/AlCrN-coated inserts. The complete 3 × 3 × 3 factorial dataset comprises 27 machining trials at spindle speeds of 800–900 rev/min, feeds of 0.15–0.25 mm/rev, and three paired depth-of-cut/nose-radius settings (1.0/0.4, 1.5/0.8, and 2.0/1.2 mm). The nominal workpiece diameter was 45 mm for all trials and was used to calculate MRR using MRR = πDNfa p . Because depth of cut and nose radius changed together, their combined influence is represented by one paired engagement/geometry factor. Spindle speed was the largest wear-related main effect (30.5% of total variation), and the speed–feed interaction accounted for 37.7%. Based on the calculated MRR values, the paired factor and feed accounted for 61.0% and 34.3% of the factorial sum of squares, respectively. The flank-wear model gave R 2 = 0.6385 and leave-one-out Q 2 = 0.1916, while the recalculated-MRR model gave R 2 = 0.9999 and Q 2 = 0.9998. The minimum measured flank wear was 0.336 mm; the minimum and maximum calculated MRR values were 16,964.6 and 63,617.3 mm 3 /min, respectively. Optical and scanning electron microscopy revealed adhered work material, abrasive grooves, edge rounding, wear debris, and localized coating damage. The results describe the machining-response trends within the investigated range.

Zitieren

APA

Ramamoorthi, V. (2026). Tialn/AlCrN coatings in dry turning of Inconel 718. Surface Engineering. https://doi.org/10.1177/02670844261508237

Vancouver

Ramamoorthi V. Tialn/AlCrN coatings in dry turning of Inconel 718. Surface Engineering. 2026. doi:10.1177/02670844261508237

BibTeX
@article{Ramamoorthi2026,
  author = {Ramamoorthi, Venkatesh},
  title = {Tialn/AlCrN coatings in dry turning of Inconel 718},
  journal = {Surface Engineering},
  year = {2026},
  doi = {10.1177/02670844261508237}
}
Kostenlos starten →