Influence of tribo-carbofilm formation on the performance of CNTs-reinforced Al6061 composites processed via multi-pass FSP
Surface Engineering · 2026-07 · 42 (7) · 756-767
DOI: 10.1177/02670844261460166 ↗Kurz gefasst
Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 18.06.2026. Verfasst von Binit Kumar und 2 weiteren Autor:innen. Die Arbeit nennt 40 Literaturangaben.
Abstract (Originalsprache)
Al6061 alloy is an environmentally friendly engineering material extensively used in the aviation, construction, and shipbuilding industries; however, its tribo-mechanical performance is relatively limited and can be enhanced by grain refinement induced by the friction stir process (FSP). The current study investigates the influence of carbon-rich tribofilm formation on the tribo-mechanical performance of carbon-nanotube (CNT)-reinforced Al6061 composites processed via multi-pass FSP. Raman spectroscopy confirmed the retention of structurally modified carbon in the nugget zone due to FSP-induced plastic strain, evidenced by a progressive increase in I D /I G ratio (raw CNT ∼ 0.74; T/CNT-2 ∼ 0.87), which was further supported by scanning electron microscopy. Crucially, no Al 4 C 3 interfacial phase was detected by XRD, confirming that CNTs retained structural integrity as lubricating reinforcements. The CNT-reinforced composite (T/CNT-2 ∼ 123.57 HV) exhibited a substantial enhancement in hardness as compared to the unprocessed sample (O ∼ 62.87 HV), primarily due to crystallite size refinement (from O ∼ 47 nm to T/CNT-2 ∼ 24 nm). Tribological investigations revealed a significant reduction in the coefficient of friction (COF) from 0.80 for the untreated sample to 0.51 for the CNT-reinforced metal matrix composite (MMC), accompanied by a substantial reduction in wear volume from 0.2427 × 10 −3 mm 3 to 0.0531 × 10 −3 mm 3 . The improved tribological behaviour is associated with the in situ formation of a carbon-rich lubricating tribofilm developed from CNT reinforcement. Scanning electron microscopy confirmed adhesive wear as the dominant wear mechanism, with a cracked tribolayer developed due to cyclic stress during fretting wear. The CNTs-reinforced composite demonstrated the lowest frictional force with minimum energy dissipation of 5.1 × 10 −4 J/cycle compared to 8 × 10 −4 J/cycle for the untreated sample (∼ 36% reduction). The improved performance demonstratre the development of self-lubricating, carbon-rich tribofilm, which enhances the tribo-mechanical performance of Al6061 composites for wear-resistant applications.
Zitieren
APA
Kumar, B., Nagdeve, L., & Kumar, H. (2026). Influence of tribo-carbofilm formation on the performance of CNTs-reinforced Al6061 composites processed via multi-pass FSP. Surface Engineering, 42(7), 756-767. https://doi.org/10.1177/02670844261460166
Vancouver
Kumar B, Nagdeve L, Kumar H. Influence of tribo-carbofilm formation on the performance of CNTs-reinforced Al6061 composites processed via multi-pass FSP. Surface Engineering. 2026;42(7):756-767. doi:10.1177/02670844261460166
BibTeX
@article{Kumar2026,
author = {Kumar, Binit and Nagdeve, Leeladhar and Kumar, Harish},
title = {Influence of tribo-carbofilm formation on the performance of CNTs-reinforced Al6061 composites processed via multi-pass FSP},
journal = {Surface Engineering},
year = {2026},
volume = {42},
number = {7},
pages = {756--767},
doi = {10.1177/02670844261460166}
}
EUVIMED