EUVIMEDEUVIMED entdecken
Crossref

Performance benchmarking of nano-clay and carbon-based nanofillers in epoxy coatings for corrosion mitigation

Nikhil Sharma, Shruti Sharma, Sandeep Kumar Sharma, Rajeev Mehta

Surface Engineering · 2026-05 · 42 (5) · 519-530

DOI: 10.1177/02670844261445210 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 23.04.2026. Verfasst von Nikhil Sharma und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Gefördert von: Science and Engineering Research Board.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Steel corrosion is commonly controlled using epoxy coatings, but their performance is often limited by microdefects that allow the ingress of corrosive ions. In this work, the epoxy matrix was modified using two categories of nanofillers to overcome these issues. The first category included nano-clay such as montmorillonite (MMT) and halloysite nanotubes (HNT), while the second category consisted of carbon-based fillers—carbon nanotubes (CNTs), graphene oxide (GO), and reduced graphene oxide (rGO). Nano-clays were used at 2 wt%, whereas the carbon-based fillers were added at 0.4 wt%. To enable a performance comparison between the two filler categories, all coated steel samples were exposed to accelerated corrosion conditions. Their performance was monitored using ultrasonic guided-wave tests, impressed-current accelerated corrosion tests, surface visual inspection, and destructive techniques, including mass loss and tensile testing. Quantitative results indicated that all nanofillers enhanced the barrier properties of the modified epoxy compared with the neat epoxy matrix. Coatings containing MMT and HNT sustained in a corrosive environment for only 70–80 days, whereas CNT- and rGO-filled systems retained some signal strength and showed less corrosion even after 90 days. The GO-based coatings exhibited the best performance, retaining high ultrasonic signal amplitude (80%), very low impressed current (

Förderung

  • Science and Engineering Research Board

Zitieren

APA

Sharma, N., Sharma, S., Sharma, S. K., & Mehta, R. (2026). Performance benchmarking of nano-clay and carbon-based nanofillers in epoxy coatings for corrosion mitigation. Surface Engineering, 42(5), 519-530. https://doi.org/10.1177/02670844261445210

Vancouver

Sharma N, Sharma S, Sharma SK, Mehta R. Performance benchmarking of nano-clay and carbon-based nanofillers in epoxy coatings for corrosion mitigation. Surface Engineering. 2026;42(5):519-530. doi:10.1177/02670844261445210

BibTeX
@article{Sharma2026,
  author = {Sharma, Nikhil and Sharma, Shruti and Sharma, Sandeep Kumar and Mehta, Rajeev},
  title = {Performance benchmarking of nano-clay and carbon-based nanofillers in epoxy coatings for corrosion mitigation},
  journal = {Surface Engineering},
  year = {2026},
  volume = {42},
  number = {5},
  pages = {519--530},
  doi = {10.1177/02670844261445210}
}
Kostenlos starten →