EUVIMEDEUVIMED entdecken
Crossref

Effect of dual shot peening pretreatment on the performance of Ti-6Al-4V alloy after active screen plasma nitriding

Tao Lai, Hong Gao, Yan Gao

Surface Engineering · 2026-06 · 42 (6) · 622-632

DOI: 10.1177/02670844261444557 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Surface Engineering, online erschienen am 23.04.2026. Verfasst von Tao Lai und 2 weiteren Autor:innen. Die Arbeit nennt 25 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The effect of dual shot-peening (DSP) pretreatment on the performance of Ti-6Al-4V alloy after active screen plasma nitriding (ASPN) was systematically studied. DSP pretreatment was designed by combining an optimized primary shot peening (conducted under 0.3 MPa for 20 min) with a secondary shot peening conducted at reduced pressures (0.1–0.2 MPa) and shorter durations (2–8 min). The secondary peening step effectively decreased surface roughness while maintaining the severe plastic deformation (SPD) layer introduced by primary peening. The optimized DSP parameters were identified as 0.1 MPa for 5 min with a primary stage at 0.3 MPa for 20 min, which reduced the surface roughness from 2.61 to 1.75 μm without inducing excessive subsurface deformation. ASPN treatment on DSP-modified samples produced a thicker and more compact nitride layer, resulting in significantly enhanced wear and corrosion performance in contrast to samples subjected only to ASPN. The improvements are attributed to the refined surface nanostructure and improved surface integrity generated by DSP pretreatment.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Lai, T., Gao, H., & Gao, Y. (2026). Effect of dual shot peening pretreatment on the performance of Ti-6Al-4V alloy after active screen plasma nitriding. Surface Engineering, 42(6), 622-632. https://doi.org/10.1177/02670844261444557

Vancouver

Lai T, Gao H, Gao Y. Effect of dual shot peening pretreatment on the performance of Ti-6Al-4V alloy after active screen plasma nitriding. Surface Engineering. 2026;42(6):622-632. doi:10.1177/02670844261444557

BibTeX
@article{Lai2026,
  author = {Lai, Tao and Gao, Hong and Gao, Yan},
  title = {Effect of dual shot peening pretreatment on the performance of Ti-6Al-4V alloy after active screen plasma nitriding},
  journal = {Surface Engineering},
  year = {2026},
  volume = {42},
  number = {6},
  pages = {622--632},
  doi = {10.1177/02670844261444557}
}
Kostenlos starten →