EUVIMEDEUVIMED entdecken
Crossref

Comparative mechanical performance of honeycomb core structures fabricated via fused deposition modeling and 3D woven composite processing

Lekhani Tripathi, Pradeep Joshi, Dushyant Dubey, Bijoya Kumar Behera

Materials Science and Technology · 01.06.2026

DOI: 10.1177/02670836261455419 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 01.06.2026. Verfasst von Lekhani Tripathi und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 45 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Honeycomb cores are critical for high-performance sandwich composites, yet their mechanical efficiency is highly dependent on the manufacturing method. This study presents a direct comparison of hexagonal honeycomb cores (9 cells, 20 mm height) fabricated via fused deposition modeling (FDM) of ABS and 3D weaving of E-glass yarns followed by epoxy infusion using vacuum-assisted resin infusion molding (VARIM). Identical cell geometries were tested under flatwise compression, edgewise compression, three-point bending, and low-velocity impact. Mechanical properties were normalized by mass and volume to assess specific structural efficiency. Results show that 3D woven honeycombs exhibit significantly superior specific strength, stiffness, and energy absorption across all loading conditions compared to FDM-ABS counterparts. The superior performance stems from continuous yarn interlacement, enabling progressive buckling and mixed-mode collapse with excellent damage tolerance. In contrast, FDM cores suffer from brittle interlayer delamination and rapid crack propagation due to weak interlayer bonding. These findings establish 3D weaving as a superior route for lightweight, high-performance honeycomb cores in weight-critical applications.

Zitieren

APA

Tripathi, L., Joshi, P., Dubey, D., & Behera, B. K. (2026). Comparative mechanical performance of honeycomb core structures fabricated via fused deposition modeling and 3D woven composite processing. Materials Science and Technology. https://doi.org/10.1177/02670836261455419

Vancouver

Tripathi L, Joshi P, Dubey D, Behera BK. Comparative mechanical performance of honeycomb core structures fabricated via fused deposition modeling and 3D woven composite processing. Materials Science and Technology. 2026. doi:10.1177/02670836261455419

BibTeX
@article{Tripathi2026,
  author = {Tripathi, Lekhani and Joshi, Pradeep and Dubey, Dushyant and Behera, Bijoya Kumar},
  title = {Comparative mechanical performance of honeycomb core structures fabricated via fused deposition modeling and 3D woven composite processing},
  journal = {Materials Science and Technology},
  year = {2026},
  doi = {10.1177/02670836261455419}
}
Kostenlos starten →