EUVIMEDEUVIMED entdecken
Crossref

A study of wear behaviour of additively Manufactured Co-Cr-Mo alloy after shot peening process

Erdogan Polat, Sercan Sabanci, Ibrahim Etem Saklakoglu

Materials Science and Technology · 13.05.2026

DOI: 10.1177/02670836261451996 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 13.05.2026. Verfasst von Erdogan Polat und 2 weiteren Autor:innen. Die Arbeit nennt 37 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the effects of shot peening (SP) on the wear behavior of laser powder bed fusion (L-PBF) manufactured Co-Cr-Mo alloys in as-built and heat-treated (HT) conditions. SP significantly increased surface hardness, reaching 685 HV via sub-structural refinement and strain-induced gamma-to-epsilon martensitic transformation (63.04% ɛ-HCP in HT + SP), confirmed by XRD analysis. The results show that the transformation-induced plasticity (TRIP) effect and dynamic work-hardening provide superior wear resistance (4.95 × 10 −5 mm 3 /Nm) in the HT + SP condition. Furthermore, SP-induced surface reactivity facilitates the formation of protective tribo-oxide films, thereby transitioning the mechanism into a self-lubricating regime. Wear test findings demonstrate that SP enhances surface integrity and may eliminate the need for post-process heat treatment in industrial and biomedical applications.

Zitieren

APA

Polat, E., Sabanci, S., & Saklakoglu, I. E. (2026). A study of wear behaviour of additively Manufactured Co-Cr-Mo alloy after shot peening process. Materials Science and Technology. https://doi.org/10.1177/02670836261451996

Vancouver

Polat E, Sabanci S, Saklakoglu IE. A study of wear behaviour of additively Manufactured Co-Cr-Mo alloy after shot peening process. Materials Science and Technology. 2026. doi:10.1177/02670836261451996

BibTeX
@article{Polat2026,
  author = {Polat, Erdogan and Sabanci, Sercan and Saklakoglu, Ibrahim Etem},
  title = {A study of wear behaviour of additively Manufactured Co-Cr-Mo alloy after shot peening process},
  journal = {Materials Science and Technology},
  year = {2026},
  doi = {10.1177/02670836261451996}
}
Kostenlos starten →