Influence of holding times on the tempering mechanisms of bainitic microstructure
Materials Science and Technology · 03.11.2025
DOI: 10.1177/02670836251391222 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 03.11.2025. Verfasst von Ehsan Tolouei und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 58 Literaturangaben.
Abstract (Originalsprache)
In this study, the effect of different tempering time in heat treatment of thick mold steel blocks was investigated. The tempering of bainitic microstructure evolution during short (30 min) and long (14 h) tempering at 620 °C, after austenitization at 900 °C was investigated. High-resolution dilatometry and microscopy revealed that the 10% retained austenite, present before tempering, decomposes directly during tempering and indirectly into fresh martensite during cooling after short tempering. In contrast, prolonged tempering results in the complete decomposition of the retained austenite. Short tempering maintains hardness, due to the formation of fresh martensite. In prolonged tempering, hardness is significantly reduced because of the martensite–austenite constituents tempering, and recovery of low-angle grain boundaries, as confirmed by nanoindentation and electron backscatter diffraction analyses.
Zitieren
APA
Tolouei, E., Hurel, V., Mirzaei, S., Morin, J., & Jahazi, M. (2025). Influence of holding times on the tempering mechanisms of bainitic microstructure. Materials Science and Technology. https://doi.org/10.1177/02670836251391222
Vancouver
Tolouei E, Hurel V, Mirzaei S, Morin J, Jahazi M. Influence of holding times on the tempering mechanisms of bainitic microstructure. Materials Science and Technology. 2025. doi:10.1177/02670836251391222
BibTeX
@article{Tolouei2025,
author = {Tolouei, Ehsan and Hurel, Valentin and Mirzaei, Sajad and Morin, Jean-Benoit and Jahazi, Mohammad},
title = {Influence of holding times on the tempering mechanisms of bainitic microstructure},
journal = {Materials Science and Technology},
year = {2025},
doi = {10.1177/02670836251391222}
}
EUVIMED