EUVIMEDEUVIMED entdecken
Crossref

The impact of pre-deformation and traverse speed on friction stir processed cu-w composites

Masoomeh Oliaei, Rohollah Jamaati, Hamed Jamshidi Aval

Materials Science and Technology · 2026-12 · 42 (18) · 1810-1828

DOI: 10.1177/02670836251345983 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 28.07.2025. Verfasst von Masoomeh Oliaei und 2 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study examined the effects of pre-deformation induced by asymmetric rolling on a copper-based metal, as well as the influence of traverse speed during friction stir processing, on the microstructure, mechanical properties, and electrical conductivity of tungsten-reinforced copper matrix composites. The findings reveal that increasing the traverse speed up to 40 mm/min results in a more uniform distribution of tungsten particles within the stir zone. The copper-tungsten (Cu-W) composite processed at a traverse speed of 40 mm/min achieves the highest hardness (124.9 ± 8.9 HV0.1), ultimate tensile strength (307.4 ± 11.8 MPa), tensile toughness (92.1 ± 1.1 MJ/m³), and electrical conductivity (92.8 ± 1.3%IACS). Compared to the as-rolled copper-based metal, the electrical conductivity of the Cu-W composite fabricated at 40 mm/min improves by 8.8%.

Zitieren

APA

Oliaei, M., Jamaati, R., & Aval, H. J. (2026). The impact of pre-deformation and traverse speed on friction stir processed cu-w composites. Materials Science and Technology, 42(18), 1810-1828. https://doi.org/10.1177/02670836251345983

Vancouver

Oliaei M, Jamaati R, Aval HJ. The impact of pre-deformation and traverse speed on friction stir processed cu-w composites. Materials Science and Technology. 2026;42(18):1810-1828. doi:10.1177/02670836251345983

BibTeX
@article{Oliaei2026,
  author = {Oliaei, Masoomeh and Jamaati, Rohollah and Aval, Hamed Jamshidi},
  title = {The impact of pre-deformation and traverse speed on friction stir processed cu-w composites},
  journal = {Materials Science and Technology},
  year = {2026},
  volume = {42},
  number = {18},
  pages = {1810--1828},
  doi = {10.1177/02670836251345983}
}
Kostenlos starten →