EUVIMEDEUVIMED entdecken
Crossref

The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding

Ali Tahaei, Behrouz Bagheri Vanani, Mahmoud Abbasi, Matia Merlin, Gian Luca Garagnani

Materials Science and Technology · 2025-01 · 41 (1) · 54-65

DOI: 10.1177/02670836241249829 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Science and Technology, online erschienen am 08.05.2024. Verfasst von Ali Tahaei und 4 weiteren Autor:innen. Die Arbeit wurde bisher 39-mal zitiert (Crossref) und nennt 34 Literaturangaben.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The corrosion behaviour and the influence of nickel and post-weld heat treatment (PWHT) on the susceptibility to corrosion in welded duplex stainless steels were investigated. After PWHT, the amount of nickel for the weld region increases resulting in the generation of austenite and consequently, helping to obtain a favourable ferrite-to-austenite ratio. Comparing the experimental outcomes, it is noticed that the pits initiate and propagate in HAZ indicating this area is more susceptible to corrosion resistance compared to the fusion zone. The pitting resistance equivalent number alone is not sufficient reason to study the complex corrosion phenomenon, and the influence of other parameters namely microstructural evolution on the breakdown of passivity by pitting and the existence of intermetallic phases should be determined together.

Zitieren

APA

Tahaei, A., Vanani, B. B., Abbasi, M., Merlin, M., & Garagnani, G. L. (2025). The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding. Materials Science and Technology, 41(1), 54-65. https://doi.org/10.1177/02670836241249829

Vancouver

Tahaei A, Vanani BB, Abbasi M, Merlin M, Garagnani GL. The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding. Materials Science and Technology. 2025;41(1):54-65. doi:10.1177/02670836241249829

BibTeX
@article{Tahaei2025,
  author = {Tahaei, Ali and Vanani, Behrouz Bagheri and Abbasi, Mahmoud and Merlin, Matia and Garagnani, Gian Luca},
  title = {The relationship between austenite stabiliser element and post-weld heat treatment on the corrosion behaviour of the welded duplex stainless steel made by gas tungsten arc welding},
  journal = {Materials Science and Technology},
  year = {2025},
  volume = {41},
  number = {1},
  pages = {54--65},
  doi = {10.1177/02670836241249829}
}
Kostenlos starten →