EUVIMEDEUVIMED entdecken
Crossref

Influence of water atomization pressure on the preparation of 420 stainless steel powder by combined water–gas atomization

Ren Jihua, He Yang, Ming Aoyang, Li Shuai

Powder Metallurgy · 2026-08 · 69 (4) · 292-298

DOI: 10.1177/00325899261460567 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 11.06.2026. Verfasst von Ren Jihua und 3 weiteren Autor:innen. Die Arbeit nennt 17 Literaturangaben. Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To prepare low-oxygen, fine-grained 420 stainless steel powder with uniform particle size distribution suitable for metal injection molding (MIM) of small-modulus gears, this study employed a combined water–gas atomization method. The systematic investigation examined the influence of water atomization pressure (90–120 MPa) on key powder properties, including particle size distribution, microstructure, oxygen content, flowability and tapped density. Additionally, the study explored the enhancement of powder storage stability through pre-oxidation treatment. Results indicate that increasing water atomization pressure reduced the median particle size ( D 50 ) from 12.10 μm to 8.9 μm, narrowing the particle size distribution. The overall sphericity of the powder is good, remaining at a moderate level under different pressures, while oxygen content decreased from 0.35% to 0.17%. Powders prepared at 115 MPa exhibited optimal comprehensive properties: uniform particle size distribution, sphericity of 0.91, oxygen content of 0.17% and tapped density of 4.53 g/cm 3 . Following pre-oxidation treatment at 200 °C and 300 °C, the oxidation rate during storage was significantly reduced, with oxygen content ultimately stabilizing around 0.26%. This study provides theoretical foundations and process references for the preparation of high-performance stainless steel powders for MIM applications.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Jihua, R., Yang, H., Aoyang, M., & Shuai, L. (2026). Influence of water atomization pressure on the preparation of 420 stainless steel powder by combined water–gas atomization. Powder Metallurgy, 69(4), 292-298. https://doi.org/10.1177/00325899261460567

Vancouver

Jihua R, Yang H, Aoyang M, Shuai L. Influence of water atomization pressure on the preparation of 420 stainless steel powder by combined water–gas atomization. Powder Metallurgy. 2026;69(4):292-298. doi:10.1177/00325899261460567

BibTeX
@article{Jihua2026,
  author = {Jihua, Ren and Yang, He and Aoyang, Ming and Shuai, Li},
  title = {Influence of water atomization pressure on the preparation of 420 stainless steel powder by combined water–gas atomization},
  journal = {Powder Metallurgy},
  year = {2026},
  volume = {69},
  number = {4},
  pages = {292--298},
  doi = {10.1177/00325899261460567}
}
Kostenlos starten →