EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Gas Atomization of Duplex Stainless Steel Powder for Laser Powder Bed Fusion

Chengsong Cui, Felix Stern iD, Nils Ellendt iD, Volker Uhlenwinkel, Matthias Steinbacher iD, Jochen Tenkamp iD, Frank Walther iD, Rainer Fechte-Heinen iD

Materials · 03.01.2023 · 16 (1) · 435

DOI: 10.3390/ma16010435 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 03.01.2023. Verfasst von Chengsong Cui und 7 weiteren Autor:innen. Beteiligte Einrichtung: Leibniz-Institute for Materials Engineering-IWT, Badgasteiner Straße 3, 28359 Bremen, Germany. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Deutsche Forschungsgemeinschaft, German Research Foundation (Deutsche Forschungsgemeinschaft, DFG).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Duplex stainless steel powders for laser additive manufacturing have not been developed extensively. In this study, the melts of a super duplex stainless steel X2CrNiMoCuWN25-7-4 (AISI F55, 1.4501) were atomized with different process gases (Ar or N2) at different atomization gas temperatures. The process gas N2 in the melting chamber leads to a higher nitrogen dissolution in the steel and a higher nitrogen content of the atomized powders. The argon-atomized powders have more gas porosity inside the particles than the nitrogen-atomized powders. In addition, the higher the atomization gas temperature, the finer the powder particles. The duplex stainless steel powders showed good processability during PBF-LB/M (Laser powder bed fusion). The gas entrapment in the powder particles, regardless of the gas chemistry and the gas content, appears to have a negligible effect on the porosity of the as-built parts.

Schlagwörter

Stichwörter der Autor:innen

duplex stainless steelgas atomizationlaser powder bed fusionpowder property

Autor:innen und Institutionen

  • Leibniz-Institute for Materials Engineering-IWT, Badgasteiner Straße 3, 28359 Bremen, Germany.
  • Chair of Materials Test Engineering (WPT), TU Dortmund University, Baroper Straße 303, 44227 Dortmund, Germany.
  • Faculty of Production Engineering, University of Bremen, Badgasteiner Straße 1, 28359 Bremen, Germany.
  • MAPEX Center for Materials and Processes, University of Bremen, 28359 Bremen, Germany.

ORCID-Profile: Felix Stern, Nils Ellendt, Matthias Steinbacher, Jochen Tenkamp, Frank Walther, Rainer Fechte-Heinen

Förderung

  • Deutsche Forschungsgemeinschaft
  • German Research Foundation (Deutsche Forschungsgemeinschaft, DFG)

Zitieren

APA

Cui, C., Stern, F., Ellendt, N., Uhlenwinkel, V., Steinbacher, M., Tenkamp, J., Walther, F., & Fechte-Heinen, R. (2023). Gas Atomization of Duplex Stainless Steel Powder for Laser Powder Bed Fusion. Materials, 16(1), 435. https://doi.org/10.3390/ma16010435

Vancouver

Cui C, Stern F, Ellendt N, Uhlenwinkel V, Steinbacher M, Tenkamp J, et al. Gas Atomization of Duplex Stainless Steel Powder for Laser Powder Bed Fusion. Materials. 2023;16(1):435. doi:10.3390/ma16010435

BibTeX
@article{Cui2023,
  author = {Cui, Chengsong and Stern, Felix and Ellendt, Nils and Uhlenwinkel, Volker and Steinbacher, Matthias and Tenkamp, Jochen and Walther, Frank and Fechte-Heinen, Rainer},
  title = {Gas Atomization of Duplex Stainless Steel Powder for Laser Powder Bed Fusion},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {1},
  pages = {435},
  doi = {10.3390/ma16010435}
}
Kostenlos starten →