EUVIMEDEUVIMED entdecken
Crossref

Enhanced flow properties of SiO 2 nanoparticles coated low-cost hydrogenation-dehydrogenation Ti-6Al-4V powder for powder bed fusion process

Ukju Gim, Sehun Kim, Tae hu Kang, Jongik Lee, Sanghee Jeong, Jimin Han, Bin Lee

Powder Metallurgy · 2025-04 · 68 (2) · 95-107

DOI: 10.1177/00325899251316954 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Powder Metallurgy, online erschienen am 24.02.2025. Verfasst von Ukju Gim und 6 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 44 Literaturangaben. Gefördert von: Korea Basic Science Institute, National Research Foundation of Korea.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powder bed fusion (PBF) is a metal additive manufacturing process known for high-dimensional accuracy and design flexibility. Spherical powders, often used in PBF, provide appropriate flowability for uniform layer recoating but are limited by low yields and high costs. In this research, low-cost hydrogenation-dehydrogenation (HDH) Ti-6Al-4V powder was used for the PBF process. To overcome its drawback of low flow properties, a simple dry-coating process of hydrophobic SiO 2 nanoparticles on the surface of the HDH Ti-6Al-4V powders was proposed. Surface-modified HDH Ti-6Al-4V powder showed enhanced flow properties, which can be utilised in the PBF process under standard conditions such as recoating speed (30 mm/s). X-ray photoelectron spectroscopy was conducted to examine the bonding between the powders and particles after dry coating. The additive-manufactured sample exhibited a relative density of over 99.8% and a 36.0% increase in Vickers hardness compared to the spherical Ti-6Al-4V powder, due to the grain refinement effect of the SiO 2 nanoparticles.

Förderung

  • Korea Basic Science Institute
  • National Research Foundation of Korea

Zitieren

APA

Gim, U., Kim, S., Kang, T. H., Lee, J., Jeong, S., Han, J., & Lee, B. (2025). Enhanced flow properties of SiO 2 nanoparticles coated low-cost hydrogenation-dehydrogenation Ti-6Al-4V powder for powder bed fusion process. Powder Metallurgy, 68(2), 95-107. https://doi.org/10.1177/00325899251316954

Vancouver

Gim U, Kim S, Kang TH, Lee J, Jeong S, Han J, et al. Enhanced flow properties of SiO 2 nanoparticles coated low-cost hydrogenation-dehydrogenation Ti-6Al-4V powder for powder bed fusion process. Powder Metallurgy. 2025;68(2):95-107. doi:10.1177/00325899251316954

BibTeX
@article{Gim2025,
  author = {Gim, Ukju and Kim, Sehun and Kang, Tae hu and Lee, Jongik and Jeong, Sanghee and Han, Jimin and Lee, Bin},
  title = {Enhanced flow properties of SiO 2 nanoparticles coated low-cost hydrogenation-dehydrogenation Ti-6Al-4V powder for powder bed fusion process},
  journal = {Powder Metallurgy},
  year = {2025},
  volume = {68},
  number = {2},
  pages = {95--107},
  doi = {10.1177/00325899251316954}
}
Kostenlos starten →