EUVIMEDEUVIMED entdecken
Crossref

Biological Properties of 3D-Printed Zirconia Implants with p-Cell Structures

W Qin iD, M H Shen, N Gan, B H Xing, J Sun iD, Z Zhao, T Jiao iD

Journal of Dental Research · 2024-04 · 103 (4) · 388-397

DOI: 10.1177/00220345231222819 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Dental Research, online erschienen am 19.02.2024. Verfasst von W Qin und 6 weiteren Autor:innen. Beteiligte Einrichtung: Department of Prosthodontics, Shanghai Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine, National Cl…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Zirconium. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 33 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Research on 3-dimensional (3D) printed porous zirconia-based dental implants is still in its infancy. This study aimed to evaluate the biological responses of novel zirconia implants with p-cell structures fabricated by 3D printing. The solid zirconia samples exhibited comparable density, 3-point flexural strength, and accelerated aging properties compared to specimens prepared previously by conventional methods. Cell-based experiments showed that the p-cell structure promoted cell proliferation, adhesion, and osteogenesis-related protein expression. Mechanical tests showed that both p-cell and control implants could withstand a torque of 35 Ncm without breaking. The mean maximum breaking loads of p-cell and control implants were 1,222.429 ± 115.591 N and 1,903.857 ± 250.673 N, respectively, which were much higher than the human physiological chewing force and human mean maximum occlusal force. An animal experiment showed that the bone trabeculae around the implants were significantly thicker, more numerous, and denser in the p-cell group than in the control group. This work could provide promising guidance for further exploring 3D printing techniques for porous zirconia bionic implants in dentistry.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Printing, Three-DimensionalZirconiumAnimalsHumansBone and BonesOsteogenesisSurface PropertiesMaterials TestingTitanium

Stichwörter der Autor:innen

TPMS structureadditive manufacturingbionic structurebone integrationdental implantzirconia material

Substanzen

zirconium oxideZirconiumTitanium

Autor:innen und Institutionen

  • Department of Prosthodontics, Shanghai Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine, National Clinical Research Center for Oral Diseases, Shanghai Key Laboratory of S…
  • School of Material Science and Engineering, Shanghai Institute of Technology, Shanghai, China.
  • College of Materials Science and Technology, Nanjing University of Aeronautics and Astronautics, Nanjing, China.

ORCID-Profile: W Qin, J Sun, T Jiao

Zitieren

APA

Qin, W., Shen, M. H., Gan, N., Xing, B. H., Sun, J., Zhao, Z., & Jiao, T. (2024). Biological Properties of 3D-Printed Zirconia Implants with p-Cell Structures. Journal of Dental Research, 103(4), 388-397. https://doi.org/10.1177/00220345231222819

Vancouver

Qin W, Shen MH, Gan N, Xing BH, Sun J, Zhao Z, et al. Biological Properties of 3D-Printed Zirconia Implants with p-Cell Structures. Journal of Dental Research. 2024;103(4):388-397. doi:10.1177/00220345231222819

BibTeX
@article{Qin2024,
  author = {Qin, W and Shen, M H and Gan, N and Xing, B H and Sun, J and Zhao, Z and Jiao, T},
  title = {Biological Properties of 3D-Printed Zirconia Implants with p-Cell Structures},
  journal = {Journal of Dental Research},
  year = {2024},
  volume = {103},
  number = {4},
  pages = {388--397},
  doi = {10.1177/00220345231222819}
}
Kostenlos starten →