EUVIMEDEUVIMED entdecken
Crossref

Multiscale investigation on tensile behavior of filament-wound composites: Fluctuation effects induced by fiber crossover undulation

Jianguo Liang, Yiwei Cui, Xiaodong Zhao, Zhanchun Chen, Haifeng Gao, Jiayi Ren, Fei Wang

Journal of Composite Materials · 26.05.2026

DOI: 10.1177/00219983261453155 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 26.05.2026. Verfasst von Jianguo Liang und 6 weiteren Autor:innen. Die Arbeit nennt 47 Literaturangaben. Gefördert von: National Natural Science Foundation of China, Fundamental Research Program of Shanxi Province, Shanxi Province Science and Technology Major Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The presence of fiber crossover and undulation (FCU) in single-filament winding (SFW) significantly influences the mechanical performance of composite layers. However, owing to the complexity involved in characterizing its influence mechanism, this structural characteristic is frequently neglected in the design of wound composites. In this study, we propose a novel approach that integrates stiffness coefficient analysis with tensile testing. First, a theoretical FCU model is established to analyze the variations in stiffness coefficients. Subsequently, multiscale comparative studies are conducted between SFW and a newly developed multi-filament winding (MFW) technique. The results demonstrate the fluctuating impact of the winding angle on the mechanical properties of composite layers fabricated using the SFW technique. To characterize the microscale failure mechanisms induced by FCU, scanning electron microscopy (SEM) is utilized. Additionally, a mesoscale finite element model is developed, which incorporates fiber bundle undulation patterns. This model is implemented using a user-defined subroutine (VUMAT), allowing for accurate prediction of the evolution of failure modes and strength properties, with an error of less than 7.79%. When compared to MFW, composite layers produced using the SFW technique exhibit higher stiffness, lower damage loads, and shorter damage displacements. Moreover, theoretical analysis reveals that FCU induces pronounced stress concentrations near a winding angle of 22.5° due to strong tensile-shear coupling. Conversely, these defects are mitigated near 67.5°.

Förderung

  • National Natural Science Foundation of China
  • Fundamental Research Program of Shanxi Province
  • Shanxi Province Science and Technology Major Project
  • Lvliang Science and Technology Guidance Special Key R&D Project
  • Shanxi-Zheda Institute of Advanced Materials and Chemical Engineering

Zitieren

APA

Liang, J., Cui, Y., Zhao, X., Chen, Z., Gao, H., Ren, J., & Wang, F. (2026). Multiscale investigation on tensile behavior of filament-wound composites: Fluctuation effects induced by fiber crossover undulation. Journal of Composite Materials. https://doi.org/10.1177/00219983261453155

Vancouver

Liang J, Cui Y, Zhao X, Chen Z, Gao H, Ren J, et al. Multiscale investigation on tensile behavior of filament-wound composites: Fluctuation effects induced by fiber crossover undulation. Journal of Composite Materials. 2026. doi:10.1177/00219983261453155

BibTeX
@article{Liang2026,
  author = {Liang, Jianguo and Cui, Yiwei and Zhao, Xiaodong and Chen, Zhanchun and Gao, Haifeng and Ren, Jiayi and Wang, Fei},
  title = {Multiscale investigation on tensile behavior of filament-wound composites: Fluctuation effects induced by fiber crossover undulation},
  journal = {Journal of Composite Materials},
  year = {2026},
  doi = {10.1177/00219983261453155}
}
Kostenlos starten →