EUVIMEDEUVIMED entdecken
Crossref

Maximising strength retention for carbon fibre prepreg scraps: A patch-based laminate approach

Adam M. Joesbury, Yogeshvaran R. Nagarajan, Jesús Molinar-Díaz, Andrew J. Parsons, Connie Qian, Lee T. Harper

Journal of Composite Materials · 05.03.2026

DOI: 10.1177/00219983261433464 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 05.03.2026. Verfasst von Adam M. Joesbury und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 36 Literaturangaben. Gefördert von: Engineering and Physical Sciences Research Council.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The growing use of carbon fibre prepreg in high-performance composite applications has led to a rapid increase in material waste from ply cutting. Components manufactured from the discarded, uncured discontinuous fibre material typically exhibit lower strength than continuous fibre counterparts, particularly when small patches are used and intra-ply joints are required to cover the surface of the final component. This study investigates strategies to enhance the performance of parts made using discontinuous woven prepreg patches, for structural applications. By exploring different patching patterns and incorporating interlaminar toughening mechanisms, high-performance laminates can be developed from otherwise wasted material. The optimum patch configuration, featuring a 100 mm patch size and a 30 mm stagger offset (Si100St30), retains 66% of the tensile strength of a continuous fibre benchmark. Introducing interleaved non-woven thermoplastic veils between the patch-based plies reduced the effect of the stress concentration at the patch ends for this design, increasing tensile strength retention to 73%. This performance is comparable to that achieved with continuous outer plies in continuous/discontinuous fibre hybrid laminates. While additional mechanical testing is needed to validate this approach for load-bearing applications, the study highlights the significant potential of patch-based laminates and identifies effective methods to maximise tensile strength retention, extending the viable use of waste prepreg materials.

Förderung

  • Engineering and Physical Sciences Research Council

Zitieren

APA

Joesbury, A. M., Nagarajan, Y. R., Molinar-Díaz, J., Parsons, A. J., Qian, C., & Harper, L. T. (2026). Maximising strength retention for carbon fibre prepreg scraps: A patch-based laminate approach. Journal of Composite Materials. https://doi.org/10.1177/00219983261433464

Vancouver

Joesbury AM, Nagarajan YR, Molinar-Díaz J, Parsons AJ, Qian C, Harper LT. Maximising strength retention for carbon fibre prepreg scraps: A patch-based laminate approach. Journal of Composite Materials. 2026. doi:10.1177/00219983261433464

BibTeX
@article{Joesbury2026,
  author = {Joesbury, Adam M. and Nagarajan, Yogeshvaran R. and Molinar-Díaz, Jesús and Parsons, Andrew J. and Qian, Connie and Harper, Lee T.},
  title = {Maximising strength retention for carbon fibre prepreg scraps: A patch-based laminate approach},
  journal = {Journal of Composite Materials},
  year = {2026},
  doi = {10.1177/00219983261433464}
}
Kostenlos starten →