Investigation of flexural properties and failure mechanisms in FFF-fabricated PLA/CaCO 3 biocomposites
Journal of Composite Materials · 25.02.2026
DOI: 10.1177/00219983261430911 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 25.02.2026. Verfasst von Kishore Ravikumar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 17 Literaturangaben.
Abstract (Originalsprache)
This study investigates the flexural performance of polylactic acid (PLA) reinforced with eggshell-derived calcium carbonate (CaCO 3 ) at 5, 10, 15, and 20 wt.% for sustainable fused filament fabrication applications. Composite filaments were fabricated via extrusion, and test specimens were manufactured using fused filament fabrication (FFF). Standard three-point bending tests revealed that a 15 wt.% CaCO 3 composite achieved the highest flexural strength (76 MPa) and modulus (1404 MPa), indicating optimal filler–matrix interaction and efficient stress transfer. A 5 wt.% CaCO 3 addition significantly enhanced ductility, yielding a maximum strain to failure of 7.03%. Further increase to 20 wt.% resulted in mechanical degradation due to particle agglomeration and reduced matrix continuity. These findings demonstrate that eggshell-derived CaCO 3 is an effective sustainable reinforcement for tailoring stiffness and strength in PLA-based components intended for lightweight structural and eco-friendly engineering applications.
Zitieren
APA
Ravikumar, K., Pathinettampadian, G., Yadav, S. K., & Vellaisamy, M. (2026). Investigation of flexural properties and failure mechanisms in FFF-fabricated PLA/CaCO 3 biocomposites. Journal of Composite Materials. https://doi.org/10.1177/00219983261430911
Vancouver
Ravikumar K, Pathinettampadian G, Yadav SK, Vellaisamy M. Investigation of flexural properties and failure mechanisms in FFF-fabricated PLA/CaCO 3 biocomposites. Journal of Composite Materials. 2026. doi:10.1177/00219983261430911
BibTeX
@article{Ravikumar2026,
author = {Ravikumar, Kishore and Pathinettampadian, Gurusamy and Yadav, Shravan Kumar and Vellaisamy, Murugan},
title = {Investigation of flexural properties and failure mechanisms in FFF-fabricated PLA/CaCO 3 biocomposites},
journal = {Journal of Composite Materials},
year = {2026},
doi = {10.1177/00219983261430911}
}
EUVIMED