EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC 4.0

Comparative study on 3D fused deposition modeling of PLA composites reinforced with flax, PALF, and hemp fibres

Sifiso John Skosana, Caroline Khoathane, Thomas Malwela, Wilson Webo

Journal of Composite Materials · 2025-08 · 59 (19) · 2293-2306

DOI: 10.1177/00219983251329097 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 21.03.2025. Verfasst von Sifiso John Skosana und 3 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the mechanical, thermal, and morphological properties of polylactic acid (PLA) composites reinforced with 10 wt% flax, hemp, and pineapple leaf fibres (PALF), produced via extrusion and Fused Deposition Modelling (FDM) 3D printing. Alkali treatment and PLA pre-coating were applied to enhance fibre-matrix interactions. Tensile testing revealed that the hemp composites exhibited the highest strength, with values reaching 29.12 MPa for surface-treated fibres, when compared to 23.84 MPa and 18.91 MPa for flax and PALF, respectively. Thermogravimetric analysis (TGA) showed that alkali-treated hemp composites had the greatest thermal stability, with an onset degradation temperature of 306°C, compared to 291°C for flax and 295°C for PALF. Scanning Electron Microscopy (SEM) confirmed improved fibre dispersion and interfacial bonding in treated hemp composites, contributing to enhanced mechanical performance. Fourier Transform Infrared (FTIR) spectroscopy revealed reduced O-H peaks, indicating successful fibre surface modifications. These findings highlight the potential of hemp fibres for automotive applications, offering superior mechanical properties and thermal stability over other natural fibres when incorporated into PLA composites.

Zitieren

APA

Skosana, S. J., Khoathane, C., Malwela, T., & Webo, W. (2025). Comparative study on 3D fused deposition modeling of PLA composites reinforced with flax, PALF, and hemp fibres. Journal of Composite Materials, 59(19), 2293-2306. https://doi.org/10.1177/00219983251329097

Vancouver

Skosana SJ, Khoathane C, Malwela T, Webo W. Comparative study on 3D fused deposition modeling of PLA composites reinforced with flax, PALF, and hemp fibres. Journal of Composite Materials. 2025;59(19):2293-2306. doi:10.1177/00219983251329097

BibTeX
@article{Skosana2025,
  author = {Skosana, Sifiso John and Khoathane, Caroline and Malwela, Thomas and Webo, Wilson},
  title = {Comparative study on 3D fused deposition modeling of PLA composites reinforced with flax, PALF, and hemp fibres},
  journal = {Journal of Composite Materials},
  year = {2025},
  volume = {59},
  number = {19},
  pages = {2293--2306},
  doi = {10.1177/00219983251329097}
}
Kostenlos starten →