Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding
Journal of Composite Materials · 2025-06 · 59 (14) · 1721-1735
DOI: 10.1177/00219983251313981 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 24.01.2025. Verfasst von Deviprasad Chalicheemalapalli Jayasankar und 3 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Over the past decades, the importance of lightweight structures in the aircraft and automotive industries has steadily increased due to regulations aimed at reducing global warming. Work hardened steel alloys are commonly used for lightweight applications, but they face stability issues when the material thickness reaches certain thresholds. Fiber Reinforced Plastics (FRP) offer a viable alternative due to their high strength-to-weight ratio, but they are often expensive due to long production cycles and high material costs. A feasible solution lies in hybrid lightweight designs that utilize expensive FRP materials only in highly stressed areas, achieving a balance between low mass and acceptable cost. These hybrid structures are lighter than metal components and more cost-effective compared to fully FRP structures, without compromising mechanical properties. This study focuses on producing rotationally symmetrical hybrid structures using Resin Transfer Molding (RTM) combined with vacuum assistance in a single-stage process. The research examines the effects of injection pressure, mold temperature, and the interface between metal and FRP. The mechanical characterization of these hybrid structures was conducted to assess their performance under torsion, compression, and interlaminar shear strength (ILSS) loading conditions. The results indicate that hybrid designs can offer a lightweight alternative without compromising mechanical properties.
Zitieren
APA
Jayasankar, D. C., Tröster, T., Ellouz, M., & Kordisch, T. (2025). Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials, 59(14), 1721-1735. https://doi.org/10.1177/00219983251313981
Vancouver
Jayasankar DC, Tröster T, Ellouz M, Kordisch T. Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding. Journal of Composite Materials. 2025;59(14):1721-1735. doi:10.1177/00219983251313981
BibTeX
@article{Jayasankar2025,
author = {Jayasankar, Deviprasad Chalicheemalapalli and Tröster, Thomas and Ellouz, Manel and Kordisch, Thomas},
title = {Intrinsic production of metal-carbon fiber reinforced plastic hybrid shafts using vacuum-assisted resin transfer molding},
journal = {Journal of Composite Materials},
year = {2025},
volume = {59},
number = {14},
pages = {1721--1735},
doi = {10.1177/00219983251313981}
}
EUVIMED