Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness
Journal of Composite Materials · 2024-11 · 58 (27) · 2879-2895
DOI: 10.1177/00219983241283598 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Composite Materials, online erschienen am 09.09.2024. Verfasst von Shafaq Shafaq und 6 weiteren Autor:innen. Die Arbeit wurde bisher 10-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0). Gefördert von: ARC Training Centre for Automated Manufacture of Advanced Composites, Defence Science and Technology Group.
Abstract (Originalsprache)
In-situ consolidation of thermoplastic composites using Automated Fibre Placement (AFP) technology is an emerging manufacturing technique, offering tailored composite properties through customised processing parameters. Multiple competing parameters during AFP manufacturing influence the quality and mechanical performance of the laminates. These lay-up parameters are interrelated, and often require comprehensive experimental characterisation which is costly and time-intensive. This study aims to optimise the fracture toughness of in-situ consolidated thermoplastic composite (AS4/APC-2) and investigate the mechanisms that contribute to it. Taguchi’s method is employed to efficiently analyse the effect of various process parameters at multiple levels. Based on the obtained results, a considerable effect of process parameters on Mode I and II fracture toughness is observed. The statistical analysis reveals that the Hot Gas Torch (HGT) temperature required for AFP processing significantly affects the Mode I fracture toughness, contributing to 33.8%. Whereas, the consolidation force, another key processing parameter in AFP notably affects Mode II fracture toughness, with the contribution of 81.8%. The analysis of variance (ANOVA) reveals interdependent processing parameter relations for both fracture modes. A validation test showed good agreement between the predicted fracture toughness and the experimental test.
Förderung
- ARC Training Centre for Automated Manufacture of Advanced Composites
- Defence Science and Technology Group
Zitieren
APA
Shafaq, S., Donough, M. J., Oromiehie, E., Islam, F., Phillips, A. W., John, N. A. S., & Prusty, B. G. (2024). Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness. Journal of Composite Materials, 58(27), 2879-2895. https://doi.org/10.1177/00219983241283598
Vancouver
Shafaq S, Donough MJ, Oromiehie E, Islam F, Phillips AW, John NAS, et al. Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness. Journal of Composite Materials. 2024;58(27):2879-2895. doi:10.1177/00219983241283598
BibTeX
@article{Shafaq2024,
author = {Shafaq, Shafaq and Donough, Matthew J and Oromiehie, Ebrahim and Islam, Faisal and Phillips, Andrew W and John, Nigel A St and Prusty, B Gangadhara},
title = {Parametric process optimisation of automated fibre placement (AFP) based AS4/APC-2 composites for mode I and mode II fracture toughness},
journal = {Journal of Composite Materials},
year = {2024},
volume = {58},
number = {27},
pages = {2879--2895},
doi = {10.1177/00219983241283598}
}
EUVIMED