Multi-Angle Averaging Approach for Measuring the Coating Thickness on Thin Transparent Polymer Films
Applied Spectroscopy · 2025-11 · 79 (11) · 1615-1624
DOI: 10.1177/00037028251334152 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Spectroscopy, online erschienen am 14.05.2025. Verfasst von Friederike Münch und 3 weiteren Autor:innen. Beteiligte Einrichtung: Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg, Germany. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fraunhofer-Gesellschaft.
Abstract (Originalsprache)
Polymer films with a thickness in the two-digit micrometer range are coated with nanometer-thin oxide layers in roll-to-roll coating systems. The coating improves the properties of the film, such as gas or water permeation. Maintaining a sufficiently large coating thickness is crucial to ensure its barrier function; thus, inline quality control of the thickness is indispensable. For this purpose, we have developed a sensing principle that addresses specific absorption bands of the coating via a reflection measurement in the infrared spectral range. However, for thin and weakly absorbing polymer substrates, light is reflected not only by the coating and the surface of the polymer. Partly it is also transmitted and reflected by the backside of the film, leading to interference effects that significantly affect the measurement signal. As industrial films vary in thickness by several percent and their exact values are unknown, determining the thickness of an oxide coating is hindered. In this paper, we demonstrate an approach for measuring coating thickness on such varying polymer films by averaging the interferences obtained at multiple angles of incidence. Calculations and measurements on industrial film samples indicate the effectiveness of our approach. It produces results with ± 2 nm precision and ± 5 nm accuracy for a thickness in the range of 5–100 nm. Furthermore, we discuss a possible implementation of this approach in an inline measurement system by fulfilling its requirements, for example, versatility and compactness.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Fraunhofer Institute for Physical Measurement Techniques IPM, Freiburg, Germany.
- Department of Microsystems Engineering-IMTEK, University of Freiburg, Freiburg, Germany.
- Department of Sustainable Systems Engineering-INATECH, University of Freiburg, Freiburg, Germany.
ORCID-Profile: Friederike Münch, Benedikt Hauer
Förderung
- Fraunhofer-Gesellschaft
Zitieren
APA
Münch, F., Hauer, B., Breunig, I., & Carl, D. (2025). Multi-Angle Averaging Approach for Measuring the Coating Thickness on Thin Transparent Polymer Films. Applied Spectroscopy, 79(11), 1615-1624. https://doi.org/10.1177/00037028251334152
Vancouver
Münch F, Hauer B, Breunig I, Carl D. Multi-Angle Averaging Approach for Measuring the Coating Thickness on Thin Transparent Polymer Films. Applied Spectroscopy. 2025;79(11):1615-1624. doi:10.1177/00037028251334152
BibTeX
@article{Mnch2025,
author = {Münch, Friederike and Hauer, Benedikt and Breunig, Ingo and Carl, Daniel},
title = {Multi-Angle Averaging Approach for Measuring the Coating Thickness on Thin Transparent Polymer Films},
journal = {Applied Spectroscopy},
year = {2025},
volume = {79},
number = {11},
pages = {1615--1624},
doi = {10.1177/00037028251334152}
}
EUVIMED