EUVIMEDEUVIMED entdecken
Crossref

Development of New TiO 2 Nanoparticles Modified Photosensitive Resin for Rapid Prototyping

Yiwen Xu, Shengcai Qi, Yuanzhi Xu

Science of Advanced Materials · 01.02.2020 · 12 (2) · 244-248

DOI: 10.1166/sam.2020.3604 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Science of Advanced Materials, erschienen am 01.02.2020. Verfasst von Yiwen Xu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The objective of this study is to enhance the thermal and mechanical properties of the photosensitive resin for RP (Rapid Prototyping) modifying with TiO 2 nanoparticles NPs. The coupling agent KH570 was chosen for treating the surface of TiO 2 NPs. The influence of the TiO 2 content on the viscosity and the curing depth of photosensitive resin were analyzed in this study. We also tested the mechanical properties such as tensile modulus, tensile strength, hardness and flexural strength. Using differential scanning calorimetry, we tested the thermal stability of the modified photosensitive resin. Modified photosensitive resin's comprehensive performance was really good when the content of TiO 2 was at 0.25%, the increase in tensile strength from 24.3 to 46.9 MPa was noticed to be 89%, the increase in tensile modulus from 1990 to 2251 MPa was noticed to be 18%, the increase in hardness and flexural strength was noticed to be 5 and 6%, respectively. Moreover, the heat stability and plasticity of the modified photosensitive resin are also enhanced. This paper gives a cost-efficient method of improving the functioning of photosensitive resin for RP.

Zitieren

APA

Xu, Y., Qi, S., & Xu, Y. (2020). Development of New TiO 2 Nanoparticles Modified Photosensitive Resin for Rapid Prototyping. Science of Advanced Materials, 12(2), 244-248. https://doi.org/10.1166/sam.2020.3604

Vancouver

Xu Y, Qi S, Xu Y. Development of New TiO 2 Nanoparticles Modified Photosensitive Resin for Rapid Prototyping. Science of Advanced Materials. 2020;12(2):244-248. doi:10.1166/sam.2020.3604

BibTeX
@article{Xu2020,
  author = {Xu, Yiwen and Qi, Shengcai and Xu, Yuanzhi},
  title = {Development of New TiO 2 Nanoparticles Modified Photosensitive Resin for Rapid Prototyping},
  journal = {Science of Advanced Materials},
  year = {2020},
  volume = {12},
  number = {2},
  pages = {244--248},
  doi = {10.1166/sam.2020.3604}
}
Kostenlos starten →