EUVIMEDAtrasti EUVIMED
Crossref

Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study

Martina Bonvicini, Carlo Monaco, Antonio Arena, Ugo Consolo, Davide Silvestri, Francesca Zicari

The International Journal of Prosthodontics · 2024

DOI: 10.11607/ijp.9191 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2024. Written by Martina Bonvicini and 5 co-authors. Major MEDLINE topics: Computer-Aided Design, Polymethyl Methacrylate, Denture, Complete, Printing, Three-Dimensional. Cited 2 times so far (Crossref).

SantraukaSubjectsBibliografiniai duomenysCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate the effect of a staining solution on the color stability of resins for complete dentures produced with conventional and digital technologies. MATERIALS AND METHODS: A total of 60 resin specimens were prepared and divided into six groups of 10 specimens each: Probase Hot (PH; Ivoclar), IvoBase CAD (IBC; Ivoclar), Ivotion Dent (ID; Ivoclar), Ivotion Dent Multi (IDM; Ivoclar), Dima Print Denture Base (DPDB; Kulzer), and Dima Print Denture Teeth (DPDT; Kulzer). One surface of each specimen was polished following the manufacturer's instructions. The CIELab color differences were evaluated before and after 28 days of immersion in a coffee solution and measured as ∆E using two dental spectrophotometers. One specimen for each group was selected for scanning electron microscopy (SEM) analysis at baseline and at 28 days. RESULTS: Data analysis was performed with Kruskal-Wallis test and post-hoc Dunn test for comparison. Regarding specimens analyzed with VITA Easyshade, IDM white zone (polished and unpolished) scored higher (∆E = 0.87 and ∆E = 1.15, respectively). All milled samples (IBC, ID, IDM pink zone), scored significantly higher compared to PH and DPDT. Regarding SpectroShade, IDM pink zone performed better for both polished and unpolished specimens (∆E = 1.57 and ∆E = 2.07, respectively). ID demonstrated a statistically higher color stability compared to PH and DPDT. Regarding SEM analysis, any difference in surface morphology was observed between baseline and 28-day immersion analyses. CONCLUSIONS: Color stability was significantly higher in resin specimens obtained with digital technologies compared to conventional resin specimens afterimmersion in a staining solution.

Subjects

MeSH terms (MEDLINE)

Computer-Aided DesignPolymethyl MethacrylateDenture, CompletePrinting, Three-DimensionalDenture DesignProsthesis ColoringColorIn Vitro TechniquesMaterials TestingSurface PropertiesHumansMicroscopy, Electron, ScanningSpectrophotometry

Substances

Polymethyl Methacrylate

Cite

APA

Bonvicini, M., Monaco, C., Arena, A., Consolo, U., Silvestri, D., & Zicari, F. (2024). Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9191

Vancouver

Bonvicini M, Monaco C, Arena A, Consolo U, Silvestri D, Zicari F. Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.9191

BibTeX
@article{Bonvicini2024,
  author = {Bonvicini, Martina and Monaco, Carlo and Arena, Antonio and Consolo, Ugo and Silvestri, Davide and Zicari, Francesca},
  title = {Color Stability of PMMA Resins for Complete Denture Produced by CAD/CAM and 3D Printing Technologies: An In Vitro Study},
  journal = {The International Journal of Prosthodontics},
  year = {2024},
  doi = {10.11607/ijp.9191}
}
Start for free →