EUVIMEDDescoperă EUVIMED
Crossref

Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome

Dóra Fehér, György Árpád Keskeny, Péter Hermann, Judit Borbély

The International Journal of Prosthodontics · 2024

DOI: 10.11607/ijp.9103 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2024. Written by Dóra Fehér and 3 co-authors. Major MEDLINE topics: Computer-Aided Design, Prosthesis Coloring, Esthetics, Dental, Dental Prosthesis Design.

RezumatSubjectsDate bibliograficeCiteRelated studies

Abstract (original language)

PURPOSE: To produce CAD/CAM reference samples for shade communication milled from the restoration materials zirconia (ZrO2) and zirconia-reinforced lithium silicate (ZLS) and evaluate the color difference with the corresponding conventional VITA Classical (VC) shade tab. Furthermore, to verify the color consistency of the materials. MATERIALS AND METHODS: In total, 55 samples were milled out of ZrO2 and ZLS in five different colors, and their color parameters were compared to the corresponding VC tabs both visually and digitally. For digital evaluation, images were taken of the samples and VC tabs and analyzed in Adobe Photoshop to extract L*a*b* values. Color difference (ΔE00) was calculated using the CIEDE 2000 formula. Multilevel mixed-effects linear regression model was used to derive estimates of the mean ∆E00. RESULTS: Color difference was significantly higher than 1.8 in the case of all the ZrO2 samples and for the ZLS A3, B2, and C2 samples. Color difference was also found during the visual comparison. Comparing the same color samples, the ΔE00 exceeded 0.8 in some cases but stayed under 1.8 in every case and showed no color difference visually. CONCLUSIONS: When comparing CAD/CAM samples and VC shade tabs, visible and measurable color differences (ΔE00 > AT50:50%) were found in the case of all ZrO2 samples and in three out of five evaluated shades of ZLS samples. The color consistency of the blocks was acceptable. Better shade communication and more reliable shade reproduction is achieved when reference photos are sent with a color sample made from the restoration material.

Subjects

MeSH terms (MEDLINE)

Computer-Aided DesignProsthesis ColoringEsthetics, DentalDental Prosthesis DesignDental MaterialsZirconiumColorHumansSilicatesDental Porcelain

Substances

Zirconiumzirconium oxideDental MaterialsSilicatesDental Porcelainlithia disilicate

Cite

APA

Fehér, D., Keskeny, G. Á., Hermann, P., & Borbély, J. (2024). Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9103

Vancouver

Fehér D, Keskeny GÁ, Hermann P, Borbély J. Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.9103

BibTeX
@article{Fehr2024,
  author = {Fehér, Dóra and Keskeny, György Árpád and Hermann, Péter and Borbély, Judit},
  title = {Reference CAD-CAM Samples for Dental Shade Communication for Successful Aesthetic Outcome},
  journal = {The International Journal of Prosthodontics},
  year = {2024},
  doi = {10.11607/ijp.9103}
}
Start for free →