EUVIMEDDescubrir EUVIMED
Crossref

Color Alterations, Flexural Strength, and Microhardness of 3DPrinted Resins Treated in Different Coloring Agents

Kevser Kurt Demirsoy, S Kutalmış Buyuk, Serdar Akarsu, Melek Hilal Kaplan, Huseyin Simsek, Feridun Abay

The International Journal of Prosthodontics · 2024

DOI: 10.11607/ijp.9043 ↗

At a glance

Journal article in The International Journal of Prosthodontics, 2024. Written by Kevser Kurt Demirsoy and 5 co-authors. Major MEDLINE topics: Printing, Three-Dimensional, Flexural Strength, Crowns, Prosthesis Coloring. Cited 3 times so far (Crossref).

ResumenSubjectsDatos bibliográficosCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate the color alterations, flexural strength, and microhardness properties of two different 3D-printed permanent crown resins. MATERIALS AND METHODS: Samples were produced from two different 3D-printed permanent crown resins: Group 1 (Saremco Crowntec, Saremco Dental) and Group 2 (P-crown V2, Senertek). Color changes (ΔE values), flexural strength, and Vickers hardness number (VHN) of the samples were calculated. Data were analyzed with Shapiro-Wilk normality test, independent t test, and Mann-Whitney U tests. The significance level was accepted as P < .05. RESULTS: ΔE values for red wine were found to be significantly higher in Group 1 (6.43 ± 2.26; P < .001). The flexural strength values (MPa) of Group 1 were significantly higher than Group 2 in all three solutions (P < .001). There was no significant difference between the VHN values of the samples kept in wine and coffee solutions (P = .271; .827). CONCLUSIONS: 3D-printing resins are affected at different levels by coloring solutions. Microhardness and flexural strength of 3D-printed samples kept in different coloring agents are different. In the use of 3D-printing resins, product selection should be made by taking into account the individual factors such as the eating and drinking habits of the patient and the physical properties expected from the sample.

Subjects

MeSH terms (MEDLINE)

Printing, Three-DimensionalFlexural StrengthCrownsProsthesis ColoringDental MaterialsHardnessColorWineMaterials Testing

Substances

Dental Materials

Cite

APA

Demirsoy, K. K., Buyuk, S. K., Akarsu, S., Kaplan, M. H., Simsek, H., & Abay, F. (2024). Color Alterations, Flexural Strength, and Microhardness of 3DPrinted Resins Treated in Different Coloring Agents. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.9043

Vancouver

Demirsoy KK, Buyuk SK, Akarsu S, Kaplan MH, Simsek H, Abay F. Color Alterations, Flexural Strength, and Microhardness of 3DPrinted Resins Treated in Different Coloring Agents. The International Journal of Prosthodontics. 2024. doi:10.11607/ijp.9043

BibTeX
@article{Demirsoy2024,
  author = {Demirsoy, Kevser Kurt and Buyuk, S Kutalmış and Akarsu, Serdar and Kaplan, Melek Hilal and Simsek, Huseyin and Abay, Feridun},
  title = {Color Alterations, Flexural Strength, and Microhardness of 3DPrinted Resins Treated in Different Coloring Agents},
  journal = {The International Journal of Prosthodontics},
  year = {2024},
  doi = {10.11607/ijp.9043}
}
Start for free →