Biomechanical evaluation of class II inlays: The role of restorative material, resin liner, and retentive pin-hole
Clinical Oral Investigations · 2026
DOI: 10.1007/s00784-026-07230-x ↗Kurz gefasst
Fachartikel in der Zeitschrift Clinical Oral Investigations, 2026. Verfasst von Wei Yu und 4 weiteren Autor:innen. Beteiligte Einrichtung: School and Hospital of Stomatology, Fujian Medical University, Fuzhou, 350002, PR China. Hauptthemen laut MEDLINE: Inlays, Dental Materials. Die Arbeit nennt 53 Literaturangaben. Gefördert von: Fujian Province Natural Science Foundation of China.
Abstract (Originalsprache)
Purpose
The objective of this study was to determine the influence of different retention designs (resin liner and retentive pin-hole) and restorative material (lithium disilicate glass-ceramic [LDGC] and zirconia) on the fracture strength and failure mode of maxillary first molars restored with class II inlays using in vitro and three-dimensional finite element analysis (3D FEA). Materials and methods 56 Human maxillary first molars were randomly assigned to 7 groups: Group A (Intact tooth, control group), Group B1 (Standard Class II restored with LDGC inlay), Group B2 (Standard Class II restored with zirconia inlay), Group C1 (Standard Class II + resin liner restored with LDGC inlay), Group C2 (Standard Class II + resin liner restored with zirconia inlay), Group D1 (Standard Class II + resin liner + retentive pin-hole restored with LDGC inlay), Group D2 (Standard Class II + resin liner + retentive pin-hole restored with zirconia inlay). Inlays were CAD/CAM-fabricated, adhesively cemented, and thermocycled (5,000 cycles). Fracture resistance of restored tooth was tested under compressive loading, failure modes were classified. 3D FEA model, identical to that used in the in vitro study, was designed to analyze the stress distribution. Data were analyzed by two-way ANCOVA and Fisher’s exact test (α = 0.05).
Results
Fracture resistance ranged from 1,922 to 3,607 N. No significant main effects of material ( P = 0.270) or retention design ( P = 0.129) were found, but their interaction was significant ( P = 0.021). LDGC showed a trend toward better fracture resistance than zirconia in standard class II cavities without a resin liner, although the difference was not statistically significant (B1 vs. B2, P = 0.080). Placing a resin liner significantly decreased LDGC fracture resistance (B1 vs. C1, P = 0.025), whereas adding a retentive pin-hole was associated with numerically higher failure loads for both materials, although the differences were not statistically significant (C1 vs. D1: P = 1.000; C2 vs. D2: P = 1.000). Type II and Type III fractures were the predominant failure patterns, collectively accounting for the vast majority of specimens in every group. 3D-FEA showed that LDGC with resin liner induced the highest enamel stress; zirconia inlays transmitted lower stress to the underlying tooth structure and demonstrated the lowest proportion of non-repairable fractures (25%).
Conclusions
Neither restorative material nor retention design alone significantly affected fracture resistance, however, their interaction was significant. LDGC inlays performed better when bonded directly without a resin liner; adding a resin liner reduced LDGC fracture resistance. Zirconia inlays transferred lower stress to the underlying tooth structure and showed lower proportion of non-repairable fractures.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Stichwörter der Autor:innen
Substanzen
Autor:innen und Institutionen
- School and Hospital of Stomatology, Fujian Medical University, Fuzhou, 350002, PR China.
- Department of Oral and Maxillofacial Surgery, School and Hospital of Stomatology, Fujian Medical University, Fuzhou, 350002, PR China.
- Department of Prosthodontics, School and Hospital of Stomatology, Fujian Medical University, No. 246 Yangqiao Zhong Road, Fuzhou, Fujian Province, 350002, PR China. longsource@126.com.
- Clinical Research Center for Oral Tissue Deficiency Diseases of Fujian Province, Fuzhou, 350002, PR China. longsource@126.com.
- Fujian Key Laboratory of Oral Diseases, Fuzhou, 350002, PR China. longsource@126.com.
Förderung
- Fujian Province Natural Science Foundation of China
Zitieren
APA
Yu, W., Lin, Y., Zheng, M. L., Niu, G., & Zhang, C. Y. (2026). Biomechanical evaluation of class II inlays: The role of restorative material, resin liner, and retentive pin-hole. Clinical Oral Investigations. https://doi.org/10.1007/s00784-026-07230-x
Vancouver
Yu W, Lin Y, Zheng ML, Niu G, Zhang CY. Biomechanical evaluation of class II inlays: The role of restorative material, resin liner, and retentive pin-hole. Clinical Oral Investigations. 2026. doi:10.1007/s00784-026-07230-x
BibTeX
@article{Yu2026,
author = {Yu, Wei and Lin, Yi and Zheng, Mei-Ling and Niu, Gang and Zhang, Chang-Yuan},
title = {Biomechanical evaluation of class II inlays: The role of restorative material, resin liner, and retentive pin-hole},
journal = {Clinical Oral Investigations},
year = {2026},
doi = {10.1007/s00784-026-07230-x}
}
EUVIMED