EUVIMEDOdkrijte EUVIMED
Crossref

The Effect of Titanium Anodization on the Bond Strength of 10-methacryloyloxydecyl Dihydrogen Phosphate (10-MDP) Resin Cement

Wolfgang Bömicke, Peter Rammelsberg, Gianluca Spatola, Stefan Rues

The International Journal of Prosthodontics · 2023-12-19 · 36 (6) · e133-e142

DOI: 10.11607/ijp.7821 ↗

At a glance

Journal article in The International Journal of Prosthodontics, published online on 2023-12-19. Written by Wolfgang Bömicke and 3 co-authors. Major MEDLINE topics: Resin Cements, Dental Bonding. Cited 5 times so far (Crossref).

PovzetekSubjectsBibliografski podatkiCiteRelated studies

Abstract (original language)

PURPOSE: To examine the effects of anodization and different surface modifications of titanium on bond strength to 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) resin cement. MATERIALS AND METHODS: Grade 5 titanium alloy disks (n = 160) were assigned to one of five prebonding surface treatment study groups (polished; polished and anodized; polished, etched, and anodized; sandblasted; sandblasted and anodized). Disks were adhesively bonded with 10-MDP resin cement (Panavia 21; bonding area: 3.3 mm in diameter) to composite resin cylinders. In each study group, tensile bond strength tests were conducted after 24 ± 1 hours and after 6 months (180 ± 2 days) of water storage (n = 16 specimens per water storage subgroup). Debonded specimens were stereomicroscopically analyzed to determine their fracture mode. Statistics included one-way and multifactorial ANOVA and Tukey post hoc tests (α = .05). RESULTS: Anodization and water storage did not significantly (P ≥ .389) affect tensile bond strength. Although subgroups of polished samples had significantly (P ≤ .031) lower bond strengths (subgroup mean values: 20 to 26 MPa) than etched or sandblasted samples (subgroup mean values: 29 to 33 MPa), they nonetheless exceeded the empirical threshold of 10 MPa used as a criterion for clinical recommendation. The fracture mode of all test specimens was predominantly cohesive. CONCLUSIONS: Anodization of titanium surfaces can be performed without weakening the adhesion of 10-MDP-based resin cement to titanium.

Subjects

MeSH terms (MEDLINE)

Resin CementsDental BondingTitaniumSurface PropertiesMethacrylatesWaterMaterials TestingZirconiumDental Stress AnalysisTensile Strength

Substances

Resin Cementsmethacryloyloxydecyl dihydrogen phosphateTitaniumMethacrylatesWaterZirconium

Cite

APA

Bömicke, W., Rammelsberg, P., Spatola, G., & Rues, S. (2023). The Effect of Titanium Anodization on the Bond Strength of 10-methacryloyloxydecyl Dihydrogen Phosphate (10-MDP) Resin Cement. The International Journal of Prosthodontics, 36(6), e133-e142. https://doi.org/10.11607/ijp.7821

Vancouver

Bömicke W, Rammelsberg P, Spatola G, Rues S. The Effect of Titanium Anodization on the Bond Strength of 10-methacryloyloxydecyl Dihydrogen Phosphate (10-MDP) Resin Cement. The International Journal of Prosthodontics. 2023;36(6):e133-e142. doi:10.11607/ijp.7821

BibTeX
@article{Bmicke2023,
  author = {Bömicke, Wolfgang and Rammelsberg, Peter and Spatola, Gianluca and Rues, Stefan},
  title = {The Effect of Titanium Anodization on the Bond Strength of 10-methacryloyloxydecyl Dihydrogen Phosphate (10-MDP) Resin Cement},
  journal = {The International Journal of Prosthodontics},
  year = {2023},
  volume = {36},
  number = {6},
  pages = {e133--e142},
  doi = {10.11607/ijp.7821}
}
Start for free →