Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion
The International Journal of Prosthodontics · 2023
DOI: 10.11607/ijp.7726 ↗At a glance
Journal article in The International Journal of Prosthodontics, 2023. Written by Mohammad D Al Amri and 5 co-authors. Major MEDLINE topics: Dental Porcelain, Coffee. Cited 1 times so far (Crossref).
Abstract (original language)
PURPOSE: To evaluate and compare the effect of accelerated aging and coffee immersion on the microhardness and gloss of a new computer-aided design and computer-aided manufacturing (CAD/CAM) hybrid material (Crystal Ultra) to those of contemporary restorative materials. MATERIALS AND METHODS: A total of 160 specimens (12 × 14 × 1 mm ± 0.05 mm) were obtained from IPS e.max (IPS), VITA Enamic (VE), Crystal Ultra (CU), Lava Ultimate (LU), and CeraSmart (CS) high-translucency CAD/CAM blocks. The Vickers microhardness and gloss of the specimens were determined after thermocycling and coffee immersion. Data analysis was performed using SPSS (α = .05). RESULTS: IPS and CS specimens exhibited the highest (572.66 ± 11.30) and lowest (61.92 ± 3.91) microhardness, respectively. The highest gloss was observed with IPS specimens (3.31 ± 0.32), and LU specimens showed the lowest gloss (2.33 ± 0.06). A significant difference in gloss was observed between the materials at all measurement intervals (P < .01), except at T0 (P = .43). IPS specimens showed no significant changes in either group at any measurement interval. CONCLUSIONS: The microhardness and gloss of the new CU material were comparable to those of the tested contemporary hybrid restorative materials. Glass-ceramic showed superior hardness and gloss compared to hybrid restorative materials. Accelerated aging with thermocycling and staining significantly affected the microhardness and gloss of all tested CAD/CAM materials.
Subjects
MeSH terms (MEDLINE)
Substances
Cite
APA
Al Amri, M. D., Labban, N., Alhijji, S. M., Alamri, H., Iskandar, M., & Platt, J. A. (2023). Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion. The International Journal of Prosthodontics. https://doi.org/10.11607/ijp.7726
Vancouver
Al Amri MD, Labban N, Alhijji SM, Alamri H, Iskandar M, Platt JA. Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion. The International Journal of Prosthodontics. 2023. doi:10.11607/ijp.7726
BibTeX
@article{AlAmri2023,
author = {Al Amri, Mohammad D and Labban, Nawaf and Alhijji, Saleh M and Alamri, Hassan and Iskandar, Mounir and Platt, Jeffrey A},
title = {Microhardness and Gloss of a New CAD/CAM Hybrid Material Following Accelerated Aging and Coffee Immersion},
journal = {The International Journal of Prosthodontics},
year = {2023},
doi = {10.11607/ijp.7726}
}
EUVIMED