EUVIMEDPoznaj EUVIMED
Crossref

Does Curing Delay Affect the Bond Strength of Fiber Post with Self-Adhesive Cements?

Allegra Comba, Andrea Baldi, Elvinas Juzikis, Edoardo Alberto Vergano, Damiano Pasqualini, Mario Alovisi, Elio Berutti, Nicola Scotti

International Journal of Prosthodontics · 2023

DOI: 10.11607/ijp.7486 ↗

At a glance

Journal article in International Journal of Prosthodontics, 2023. Written by Allegra Comba and 7 co-authors. Major MEDLINE topics: Dental Bonding, Post and Core Technique.

AbstraktSubjectsDane bibliograficzneCiteRelated studies

Abstract (original language)

PURPOSE: To evaluate the effect of three different curing protocols based on different ratios of self-curing and light-curing periods on the bond strength and nanoleakage of fiber posts luted with dual-curing self-adhesive cements. MATERIALS AND METHODS: A total of 48 single-root teeth were endodontically treated and obturated, and an 8-mm post space was prepared with dedicated drills. Specimens were randomly divided into two groups according to the self-adhesive cement employed: group 1 (G1) = PANAVIA SA Plus (Kuraray Noritake), and group 2 (G2) = Bifix SE (VOCO). The specimens were further divided into three subgroups (n = 8 each) according to the light-curing protocol applied: no light-curing (SG1), 20 seconds of light-curing 20 seconds after cement injection (SG2), and 20 seconds of light-curing 120 seconds after cement injection (SG3). Slices of 1-mm thickness were prepared for the pushout test and nanoleakage analyses of the coronal and apical regions after 24 hours of storage in artificial saliva. Results were statistically analyzed with three-way ANOVA and Tukey post hoc tests. Statistical significance was set for P < .05. RESULTS: Three-way ANOVA analysis showed that the factors of cement (P = .02) and curing protocol (P < .001) had a significant influence on bond strength. Tukey post hoc test reported that light-curing 120 seconds after injection showed higher bond strength compared to both no light-curing and photoactivation after 20 seconds. CONCLUSION: To achieve the highest bond strength with self-adhesive cements, photoactivation with a 120-second delay after mixing is required. There is no difference between light-curing immediately and light-curing 20 seconds after mixing.

Subjects

MeSH terms (MEDLINE)

Dental BondingPost and Core TechniqueResin CementsDental Stress AnalysisMaterials TestingDentin

Substances

Adhesive cementResin Cements

Cite

APA

Comba, A., Baldi, A., Juzikis, E., Vergano, E. A., Pasqualini, D., Alovisi, M., Berutti, E., & Scotti, N. (2023). Does Curing Delay Affect the Bond Strength of Fiber Post with Self-Adhesive Cements?. International Journal of Prosthodontics. https://doi.org/10.11607/ijp.7486

Vancouver

Comba A, Baldi A, Juzikis E, Vergano EA, Pasqualini D, Alovisi M, et al. Does Curing Delay Affect the Bond Strength of Fiber Post with Self-Adhesive Cements?. International Journal of Prosthodontics. 2023. doi:10.11607/ijp.7486

BibTeX
@article{Comba2023,
  author = {Comba, Allegra and Baldi, Andrea and Juzikis, Elvinas and Vergano, Edoardo Alberto and Pasqualini, Damiano and Alovisi, Mario and Berutti, Elio and Scotti, Nicola},
  title = {Does Curing Delay Affect the Bond Strength of Fiber Post with Self-Adhesive Cements?},
  journal = {International Journal of Prosthodontics},
  year = {2023},
  doi = {10.11607/ijp.7486}
}
Start for free →