Study of the Hydraulic and Statistical Behavior of a Combined Structure Under the Influence of a Single L‐Super Dike
Modelling and Simulation in Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/mse/3451122 ↗Kurz gefasst
Fachartikel in der Zeitschrift Modelling and Simulation in Engineering, online erschienen am 14.07.2026. Verfasst von Rafi M. Qasim und 2 weiteren Autor:innen. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
The combined weir‐gate systems are commonly used in water resources projects, but their hydraulic responses become significantly more complicated in the presence of downstream obstacles such as dikes, and the statistically based treatment of their hydraulics has received little attention. In the present study, the hydraulic and statistical characteristics of a rectangular combined weir‐gate system with a single L‐shaped super dike downstream are experimentally investigated under four different operating conditions. The experiments were conducted in a rectangular laboratory flume of 200 × 15 × 7.5 cm using 5 mm‐thick beveled wooden structures, and 27 experiments were performed for each case by changing the pump discharge. The measured parameters were the actual discharge, downstream water depth, and water depth above the weir. The hydraulic investigation includes downstream velocity, specific energy, discharge coefficient, Froude number, and Reynolds number. The results were statistically treated using (a) descriptive statistics to provide a general overview of the seven variables, (b) the Pearson correlation coefficient to analyze the relationships between the different variables and to inspect the existence of multicollinearity, and (c) multiple linear regression (MLR) modeling of the discharge to predict its values using different variables, which was validated using R 2 , adjusted R 2 , F ‐statistics, p values, and residual scatter plots. Furthermore, the application of probability distribution functions (normal, Poisson, and binomial) to the measured data was investigated for each case. The MLR models performed very well, with R 2 values ranging from 98.77% to 99.52%, and hence may be adopted for discharge prediction of the studied structure. Compared to the classical theoretical equations, the proposed MLR models produced significantly better results. The downstream velocity and the average downstream water depth were found to be the most important variables. The mean values of the discharge and discharge coefficient ranged from 0.000905 to 0.001102 m 3 /s and 0.733 to 0.886, respectively. It was found that the measured discharges followed the normal distribution for Cases 1–4, a Poisson‐like pattern for Case 2, and a binomial‐like pattern for Case 3. The results provide statistically based and empirically based relations for the discharge prediction of combined hydraulic structures.
Zitieren
APA
Qasim, R. M., Dawood, A. S., & Faisal, S. H. (2026). Study of the Hydraulic and Statistical Behavior of a Combined Structure Under the Influence of a Single L‐Super Dike. Modelling and Simulation in Engineering, 2026(1). https://doi.org/10.1155/mse/3451122
Vancouver
Qasim RM, Dawood AS, Faisal SH. Study of the Hydraulic and Statistical Behavior of a Combined Structure Under the Influence of a Single L‐Super Dike. Modelling and Simulation in Engineering. 2026;2026(1). doi:10.1155/mse/3451122
BibTeX
@article{Qasim2026,
author = {Qasim, Rafi M. and Dawood, Ammar S. and Faisal, Safaa H.},
title = {Study of the Hydraulic and Statistical Behavior of a Combined Structure Under the Influence of a Single L‐Super Dike},
journal = {Modelling and Simulation in Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/mse/3451122}
}
EUVIMED