EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Synthesis and Application of Polymer N‐D‐HPAM for Oil Displacement

Xiaopin Qin, Xi Chen, Haiwei Liu, Zhenyuan Wang, Jinsheng Jiao, Xiaoliang Yang, Yangyang Yu, Wei Liu, Guanglin Zhou, Xiaonan Liu, Wenzhong Tian, Guangliang Lu und 2 weitere

Journal of Chemistry · 2026-01 · 2026 (1)

DOI: 10.1155/joch/3754202 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Journal of Chemistry, online erschienen am 17.11.2026. Verfasst von Xiaopin Qin und 13 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fudan University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Acrylic acid (AA), acrylamide (AM), octadecyl dimethyl allyl ammonium chloride (DMCAAC‐18), and 1‐vinyl‐2‐pyrrolidone (NVP) were used as the main raw materials, and ammonium persulfate–sodium bisulfite was used as the initiator to synthesize a polymer for oil flooding, N‐D‐HPAM, which was synthesized by aqueous solution polymerization. The synthesis conditions were as follows: The total mass concentration of the monomer was 25%, the dosage of initiator was 0.2% of the total mass of the monomer, the reaction temperature was 40°C, and the reaction time was 4 h. The structure of N‐D‐HPAM was characterized by infrared spectroscopy, nuclear magnetic resonance hydrogen spectroscopy, and scanning electron microscopy. The viscosity, shear resistance, temperature resistance, salt resistance, and oil displacement properties of N‐D‐HPAM were studied. The experimental results showed that the apparent viscosity of the 2000 mg/L N‐D‐HPAM solution prepared with injected water was significantly higher than that of the hydrolyzed polyacrylamide (HPAM) solution at the same concentration. After 30 s of mechanical shear at 20,000 r/min, the viscosity retention of 2000 mg/L N‐D‐HPAM solution was 85.73%, which was 14% higher than that of HPAM of the same concentration. Under the same experimental conditions, the enhanced oil recovery of N‐D‐HPAM solution was 17.76%, which was 6.48% higher than that of HPAM solution, and N‐D‐HPAM showed good oil displacement ability.

Förderung

  • Fudan University

Zitieren

APA

Qin, X., Chen, X., Liu, H., Wang, Z., Jiao, J., Yang, X., Yu, Y., Liu, W., Zhou, G., Liu, X., Tian, W., Lu, G., Tang, P., & Qing, S. (2026). Synthesis and Application of Polymer N‐D‐HPAM for Oil Displacement. Journal of Chemistry, 2026(1). https://doi.org/10.1155/joch/3754202

Vancouver

Qin X, Chen X, Liu H, Wang Z, Jiao J, Yang X, et al. Synthesis and Application of Polymer N‐D‐HPAM for Oil Displacement. Journal of Chemistry. 2026;2026(1). doi:10.1155/joch/3754202

BibTeX
@article{Qin2026,
  author = {Qin, Xiaopin and Chen, Xi and Liu, Haiwei and Wang, Zhenyuan and Jiao, Jinsheng and Yang, Xiaoliang and Yu, Yangyang and Liu, Wei and Zhou, Guanglin and Liu, Xiaonan and Tian, Wenzhong and Lu, Guangliang and Tang, Peng and Qing, Song},
  title = {Synthesis and Application of Polymer N‐D‐HPAM for Oil Displacement},
  journal = {Journal of Chemistry},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/joch/3754202}
}
Kostenlos starten →