EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Optimization of HPAM Polymer Flooding for Enhanced Oil Recovery Through Experimental Core Flooding and Predictive Statistical Modeling

Azizollah Khormali iD, Soroush Ahmadi iD

Polymers · 01.07.2026 · 18 (13) · 1640

DOI: 10.3390/polym18131640 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Polymers, online erschienen am 01.07.2026. Verfasst von Azizollah Khormali und 1 weiteren Autor:innen. Beteiligte Einrichtung: Department of Chemistry, Faculty of Basic Sciences and Engineering, Gonbad Kavous University, Gonbad Kavous P.O. Box 4971799151, Iran. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 75 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Gonbad Kavous University.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Polymer flooding is one of the most widely implemented chemical-enhanced oil recovery (EOR) techniques for improving sweep efficiency and mobilizing residual oil in mature reservoirs. However, the performance of partially hydrolyzed polyacrylamide (HPAM) flooding is strongly influenced by reservoir temperature, formation water salinity, and polymer concentration, particularly in carbonate formations where harsh reservoir conditions may significantly reduce polymer effectiveness. In this study, laboratory core flooding experiments combined with Response Surface Methodology (RSM) and Analysis of Variance (ANOVA) were employed to systematically investigate and optimize the effects of temperature, HPAM concentration, and salinity on the incremental recovery factor (RF) of matrix-type carbonate core samples. A total of 45 flooding experiments were conducted under temperatures ranging from 20 to 80 °C, polymer concentrations between 500 and 2500 ppm, and salinities from 1000 to 100,000 ppm. A highly significant quadratic model was developed, exhibiting excellent predictive capability (R2 = 0.9991, p < 0.0001) and accurately describing the individual and interactive effects of the investigated variables. Among the examined parameters, HPAM concentration was identified as the dominant factor controlling flooding performance, followed by salinity and temperature. The incremental recovery factor varied from approximately 6 to 19%, and optimization analysis predicted a maximum RF of 18.82% at 20 °C, 2500 ppm HPAM concentration, and 10,000 ppm salinity. Furthermore, optimization under high-temperature and high-salinity conditions revealed that a minimum HPAM concentration of about 2150 ppm is required to maintain RF values above 10%. The proposed experimental–statistical framework provides a reliable tool for predicting and optimizing HPAM flooding performance and offers practical guidance for polymer flooding design in carbonate reservoirs.

Schlagwörter

Stichwörter der Autor:innen

HPAM polymer floodingcarbonate reservoirsenhanced oil recoveryhigh salinityresponse surface methodology

Autor:innen und Institutionen

  • Department of Chemistry, Faculty of Basic Sciences and Engineering, Gonbad Kavous University, Gonbad Kavous P.O. Box 4971799151, Iran.
  • Department of Chemical Engineering, Faculty of Petroleum, Gas, and Petrochemical Engineering, Persian Gulf University, Bushehr P.O. Box 7516913817, Iran.

ORCID-Profile: Azizollah Khormali, Soroush Ahmadi

Förderung

  • Gonbad Kavous University

Zitieren

APA

Khormali, A., & Ahmadi, S. (2026). Optimization of HPAM Polymer Flooding for Enhanced Oil Recovery Through Experimental Core Flooding and Predictive Statistical Modeling. Polymers, 18(13), 1640. https://doi.org/10.3390/polym18131640

Vancouver

Khormali A, Ahmadi S. Optimization of HPAM Polymer Flooding for Enhanced Oil Recovery Through Experimental Core Flooding and Predictive Statistical Modeling. Polymers. 2026;18(13):1640. doi:10.3390/polym18131640

BibTeX
@article{Khormali2026,
  author = {Khormali, Azizollah and Ahmadi, Soroush},
  title = {Optimization of HPAM Polymer Flooding for Enhanced Oil Recovery Through Experimental Core Flooding and Predictive Statistical Modeling},
  journal = {Polymers},
  year = {2026},
  volume = {18},
  number = {13},
  pages = {1640},
  doi = {10.3390/polym18131640}
}
Kostenlos starten →