EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Extrudate Swell of Two High‐Molecular‐Weight High‐Density Polyethylenes and Their Blends: Experiments and Assessment of Models

Shaiful Nizam Iskandar Mad Dali, Mat Uzir Wahit, John Vlachopoulos, Agus Arsad

Advances in Polymer Technology · 2026-01 · 2026 (1)

DOI: 10.1155/adv/8104044 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Polymer Technology, online erschienen am 20.11.2026. Verfasst von Shaiful Nizam Iskandar Mad Dali und 3 weiteren Autor:innen. Die Arbeit nennt 51 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

One high‐density polyethylene (HDPE) resin had a melt flow index (MFI) of 0.49 g/10 min and the other 0.14 g/10 min (with 5 kg load at 190°C). Three polymer blends were prepared, using a twin‐screw extruder, at mass ratios 70/30, 50/50, and 30/70. All polymer samples were characterized by size exclusion chromatography (SEC) and the molecular weight averages M n , M w , M z , and M z +1 were determined. Storage and loss moduli ( G ′ and G ′′ ) were determined from small amplitude oscillatory shear (SAOS) measurements. Predictions using mixing rules for blend rheological properties were compared to experimental measurements. Power‐law viscosity curves were obtained from a capillary viscometer. All samples exhibited stick‐slip instability at high shear rates and stresses, but no sharkskin was detected in any of them. Extrudate swell measurements were carried out using cylindrical dies of different lengths. Swell decreased exponentially with die length, and it was larger for samples having larger molecular weight ratio . From the SAOS data the first normal stress difference was determined as a function of shear stress. Four expressions relating swell ratio ( d / D ) to the first normal stress difference and shear stress were evaluated.

Zitieren

APA

Dali, S. N. I. M., Wahit, M. U., Vlachopoulos, J., & Arsad, A. (2026). Extrudate Swell of Two High‐Molecular‐Weight High‐Density Polyethylenes and Their Blends: Experiments and Assessment of Models. Advances in Polymer Technology, 2026(1). https://doi.org/10.1155/adv/8104044

Vancouver

Dali SNIM, Wahit MU, Vlachopoulos J, Arsad A. Extrudate Swell of Two High‐Molecular‐Weight High‐Density Polyethylenes and Their Blends: Experiments and Assessment of Models. Advances in Polymer Technology. 2026;2026(1). doi:10.1155/adv/8104044

BibTeX
@article{Dali2026,
  author = {Dali, Shaiful Nizam Iskandar Mad and Wahit, Mat Uzir and Vlachopoulos, John and Arsad, Agus},
  title = {Extrudate Swell of Two High‐Molecular‐Weight High‐Density Polyethylenes and Their Blends: Experiments and Assessment of Models},
  journal = {Advances in Polymer Technology},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adv/8104044}
}
Kostenlos starten →