EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends

Hniya Kharmoudi, Alae Lamtai, Said Elkoun iD, Mathieu Robert iD, Carl Diez

Materials · 26.09.2024 · 17 (19) · 4733

DOI: 10.3390/ma17194733 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.09.2024. Verfasst von Hniya Kharmoudi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Center for Innovation in Technological Eco-Design (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada. Die Arbeit wurde bisher 7-mal zitiert (Crossref) und nennt 44 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Mitacs, Soleno Inc..

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study uses an extrusion process to formulate blends based on recycled high-density and high-molecular-weight polyethylene (recHDPE, recHMWPE) for the manufacture of rainwater drainage pipes. The main objective of this project is to investigate the effects of incorporating graphene on the mechanical, thermal, and stress-cracking resistance properties of the recycled HDPE and HMWPE blends. Also, it aims to demonstrate that the addition of graphene may enable the use of different recycled polymers without compromising their properties. The effects of adding two amounts of graphene (0.5 and 1%) to recycled blends on the tensile and flexion properties, stress crack resistance (SCR) (using a notched crack ligament stress (NCLS) test), thermal behavior (using a differential scanning calorimeter (DSC) and a rheological plastometer) were investigated. The experimental results showed a significative enhancement when adding graphene in the SCR, some tensile properties (elongation at break and tensile strength), and flexural modulus. However, physical characterization showed that the samples containing 0.5% graphene exhibited lower crystallinity compared to the reference and, for the blend with 1% graphene, the fluidity also decreased for the blend filled with the graphene compared to the reference blend without any filler.

Schlagwörter

Stichwörter der Autor:innen

graphenemechanicalrecycled high molecular weightrecycled high-density polyethylenestress crack resistancethermal properties

Autor:innen und Institutionen

  • Center for Innovation in Technological Eco-Design (CITE), University of Sherbrooke, Sherbrooke, QC J1K 2R1, Canada.
  • Research Center for High Performance Polymer and Composite Systems, CREPEC, Montréal, QC H3A 0C3, Canada.
  • Soleno Inc. Maitrise de l'Eau Pluviale, Saint-Jean-sur-Richelieu, QC J2X 4B6, Canada.

ORCID-Profile: Said Elkoun, Mathieu Robert

Förderung

  • Mitacs
  • Soleno Inc.

Zitieren

APA

Kharmoudi, H., Lamtai, A., Elkoun, S., Robert, M., & Diez, C. (2024). Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends. Materials, 17(19), 4733. https://doi.org/10.3390/ma17194733

Vancouver

Kharmoudi H, Lamtai A, Elkoun S, Robert M, Diez C. Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends. Materials. 2024;17(19):4733. doi:10.3390/ma17194733

BibTeX
@article{Kharmoudi2024,
  author = {Kharmoudi, Hniya and Lamtai, Alae and Elkoun, Said and Robert, Mathieu and Diez, Carl},
  title = {Effect of Graphene on the Mechanical Properties of Recycled High-Density and High-Molecular-Weight Polyethylene Blends},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {19},
  pages = {4733},
  doi = {10.3390/ma17194733}
}
Kostenlos starten →