Uplift Bearing Behavior of Variable‐Section Pile Foundations for Transmission Towers in Overlying Soil and Underlying Rock Strata
Advances in Civil Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/adce/5538266 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 15.07.2026. Verfasst von Zhen-qi Weng und 4 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
To resolve the insufficient mobilization of shaft resistance in piles embedded in overlying soil and underlying rock due to stiffness incompatibility and to optimize the axial stiffness distribution of pile shafts, this study explored the uplift bearing behavior of variable‐section piles. Laboratory model tests combined with ABAQUS numerical simulations were conducted to quantify the effects of the section ratio (0.3, 0.5, and 0.7) and transition location (soil layer, soil–rock interface, and rock layer) on uplift response. The results indicated that the ultimate uplift capacities increased by 153% and 117% in the experimental and numerical analyses respectively with the transition in the soil layer and the section ratio increasing from 0.3 to 0.7. Additionally, the section transition location exerted a strong control on the load–displacement behavior: for a constant section ratio of 0.3, relocating the transition from the soil layer to the layer improved the uplift capacity by 123% and 118%, respectively. The highest uplift capacity was obtained when the transition was embedded in the rock layer, whereas the smallest ultimate displacement was identified when the transition was located at the soil–rock interface owing to the superposition of geometric and stratigraphic stiffness discontinuities. Finally, the failure mechanism was governed by the coupled effect of section ratio and transition location. The small section ratio ( λ = 0.3) promoted tensile cracking of the pile, whereas transitions positioned in the rock layer shifted the failure mode toward pile–rock interface slip. The engineering evaluation demonstrated that the bearing capacity per unit concrete volume of optimized variable‐section piles (e. g., transition in the rock layer with λ = 0.7) was ~20.8% higher than that of uniform‐section piles, confirming their superior material efficiency and providing a quantitative basis for uplift‐resistant pile design in soil–rock composite strata.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Weng, Z., Ni, H., Chen, X., Pan, L., & Pan, K. (2026). Uplift Bearing Behavior of Variable‐Section Pile Foundations for Transmission Towers in Overlying Soil and Underlying Rock Strata. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/5538266
Vancouver
Weng Z, Ni H, Chen X, Pan L, Pan K. Uplift Bearing Behavior of Variable‐Section Pile Foundations for Transmission Towers in Overlying Soil and Underlying Rock Strata. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/5538266
BibTeX
@article{Weng2026,
author = {Weng, Zhen-qi and Ni, Hao and Chen, Xiao-fei and Pan, Lin-yong and Pan, Ke-yu},
title = {Uplift Bearing Behavior of Variable‐Section Pile Foundations for Transmission Towers in Overlying Soil and Underlying Rock Strata},
journal = {Advances in Civil Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adce/5538266}
}
EUVIMED