Sensitivity Analysis of Overburden Displacement to the Evolution of Geometric Parameters in Large Mining Height Faces of Shallow Coal Seams
Advances in Civil Engineering · 2026-01 · 2026 (1)
DOI: 10.1155/adce/5165024 ↗Kurz gefasst
Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 20.07.2026. Verfasst von Xiaolei Lv und 5 weiteren Autor:innen. Die Arbeit nennt 33 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Natural Science Foundation of Inner Mongolia.
Abstract (Originalsprache)
To reveal the influence of geometric parameter evolution of a shallow‐buried and large‐mining‐height working face on the displacement and sensitivity of overlying strata, the 211 workface and 217 workface in the No. 2 coal were taken as the engineering background. The response law of the overburden displacement field to variations in working face geometric parameters was systematically investigated via FLAC3D numerical simulation, quantitative sensitivity analysis, and in situ strata pressure monitoring. The research results indicate that: (1) there exists a critical threshold of 209.45 m for the influence of working face length on overburden displacement. When the working face length is less than the critical value, an increase in working face length suppresses changes in overburden displacement. When the working face length exceeds the critical value, an increase in working face length promotes the growth of overburden displacement. (2) When the working face length increased from 300 to 350 m, the maximum overburden displacement at a mining height of 7 m showed a 38% increase compared to that at a mining height of 4 m. The greater mining height weakens the overburden strength and expands the plastic zone. (3) The sensitivity of overburden displacement to working face length and height exhibits a nonlinear exponential growth. The sensitivity of working face length to the maximum displacement of overlying strata is most significant when the working face height is 7 m, and the sensitivity of working face height to the maximum displacement of overlying strata is most significant when the working face length is 350 m. (4) The support resistance of the 217 working face shows significant overlying rock instability characteristics compared with those of the 211 working face, which is consistent with the conclusions of the sensitivity analysis of the overlying rock displacement field. The research conclusions provide threshold criteria and sensitivity control paths for the safety design of high mining‐height working faces.
Förderung
- Natural Science Foundation of Inner Mongolia
Zitieren
APA
Lv, X., Shi, W., Meng, B., Li, T., Yu, Y., & Xiao, F. (2026). Sensitivity Analysis of Overburden Displacement to the Evolution of Geometric Parameters in Large Mining Height Faces of Shallow Coal Seams. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/5165024
Vancouver
Lv X, Shi W, Meng B, Li T, Yu Y, Xiao F. Sensitivity Analysis of Overburden Displacement to the Evolution of Geometric Parameters in Large Mining Height Faces of Shallow Coal Seams. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/5165024
BibTeX
@article{Lv2026,
author = {Lv, Xiaolei and Shi, Weiping and Meng, Baowei and Li, Tan and Yu, Yaohua and Xiao, Fei},
title = {Sensitivity Analysis of Overburden Displacement to the Evolution of Geometric Parameters in Large Mining Height Faces of Shallow Coal Seams},
journal = {Advances in Civil Engineering},
year = {2026},
volume = {2026},
number = {1},
doi = {10.1155/adce/5165024}
}
EUVIMED