EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Bearing Capacity of Assembled Prestressed Concrete Continuous Box‐Girder Bridges Based on Virtual Loading of Influence Lines

Shizhan Xu, Hao Li, Zhantao Zhao, Jiangping Tang, Yinggang Ma

Advances in Civil Engineering · 2026-01 · 2026 (1)

DOI: 10.1155/adce/2220398 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Advances in Civil Engineering, online erschienen am 05.07.2026. Verfasst von Shizhan Xu und 4 weiteren Autor:innen. Die Arbeit nennt 22 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In order to accurately identify the influence line from the dynamic response of vehicle‐induced bridges to rapidly evaluate bridge bearing capacity, an influence line identification method based on variational mode decomposition (VMD) and the Tikhonov regularization method is proposed. In this method, the bridge response is measured by the sensors while the moving vehicle loads the bridge, and then the VMD is used to decompose the monitored bridge response and extract the static components in the bridge response. Then the general representation function of the bridge response under the action of multiaxis moving vehicles is constructed. According to the superposition principle, the mathematical model of the influence line and the bridge response is constructed by combining the information of moving vehicles. Tikhonov regularization is introduced to solve the underdetermined matrix equations so as to eliminate the multiaxis load effect of the vehicle and obtain the influence line under the unit force. To verify the accuracy of the identified influence line, the influence line obtained by the static load test is compared with its virtual loading value. The results show that the error of the deflection calibration coefficient is less than 2% and the error of the strain calibration coefficient is less than 5% by calculating the real bridge calibration coefficient based on the virtual loading of the influence line and comparing it with the measured calibration coefficient. The proposed method can be used in the case of short‐term interruption of traffic.

Förderung

  • National Natural Science Foundation of China

Zitieren

APA

Xu, S., Li, H., Zhao, Z., Tang, J., & Ma, Y. (2026). Evaluation of Bearing Capacity of Assembled Prestressed Concrete Continuous Box‐Girder Bridges Based on Virtual Loading of Influence Lines. Advances in Civil Engineering, 2026(1). https://doi.org/10.1155/adce/2220398

Vancouver

Xu S, Li H, Zhao Z, Tang J, Ma Y. Evaluation of Bearing Capacity of Assembled Prestressed Concrete Continuous Box‐Girder Bridges Based on Virtual Loading of Influence Lines. Advances in Civil Engineering. 2026;2026(1). doi:10.1155/adce/2220398

BibTeX
@article{Xu2026,
  author = {Xu, Shizhan and Li, Hao and Zhao, Zhantao and Tang, Jiangping and Ma, Yinggang},
  title = {Evaluation of Bearing Capacity of Assembled Prestressed Concrete Continuous Box‐Girder Bridges Based on Virtual Loading of Influence Lines},
  journal = {Advances in Civil Engineering},
  year = {2026},
  volume = {2026},
  number = {1},
  doi = {10.1155/adce/2220398}
}
Kostenlos starten →