EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Behaviour and Parametric Analysis of the Hybrid Girder Bridges Joint Between Steel-Concrete Composite Girder and Prestressed Concrete Girder

Yiteng Lin, Qingtian Su, Fawas. O. Matanmi, Xingfei Yan, Shang Gao

Applied Sciences · 24.06.2026 · 16 (13) · 6322

DOI: 10.3390/app16136322 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 24.06.2026. Verfasst von Yiteng Lin und 4 weiteren Autor:innen. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Shanghai Municipal Commission of Housing and Urban-Rural Development Management Research Project, Shanghai Municipal Commission of Science and Technology Science and Technology Program Project.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on a novel three-span hybrid continuous beam bridge, analyzing the force performance and key design parameters of the non-cellular post-support plate joint. A finite element model and parametric analysis were used to reveal the stress distribution patterns, the load-bearing characteristics of the connectors, and the load transfer path under negative bending moments. The study shows that the axial force within the joint is equitably shared among three load paths: the top slab concrete (20.7%), the bearing plate (40.1%), and the shear connectors (39.2%). Although interfacial friction contributes approximately 27.1% to the total shear resistance, it is conservatively recommended to neglect this effect in design due to inherent uncertainties. Parametric analysis reveals distinct marginal effects and efficiency thresholds: increasing the bearing plate thickness from 20 mm to 100 mm results in a mere 1.0 MPa reduction in the peak concrete stress, while extending the joint length beyond 1.0 times the beam height renders the central connectors ineffective. Furthermore, reducing the connector stiffness effectively lowers the non-uniformity coefficient from 2.3 to below 2.0. Notably, the first row of web PBLs carries 34.8% to 47.2% of the total shear force, with a stable non-uniformity coefficient of 1.05–1.06, establishing it as the critical control section for simplified design. These findings provide a theoretical basis and practical guidance for the design of similar joints in hybrid girder bridges.

Förderung

  • Shanghai Municipal Commission of Housing and Urban-Rural Development Management Research Project
  • Shanghai Municipal Commission of Science and Technology Science and Technology Program Project

Zitieren

APA

Lin, Y., Su, Q., Matanmi, F. O., Yan, X., & Gao, S. (2026). Mechanical Behaviour and Parametric Analysis of the Hybrid Girder Bridges Joint Between Steel-Concrete Composite Girder and Prestressed Concrete Girder. Applied Sciences, 16(13), 6322. https://doi.org/10.3390/app16136322

Vancouver

Lin Y, Su Q, Matanmi FO, Yan X, Gao S. Mechanical Behaviour and Parametric Analysis of the Hybrid Girder Bridges Joint Between Steel-Concrete Composite Girder and Prestressed Concrete Girder. Applied Sciences. 2026;16(13):6322. doi:10.3390/app16136322

BibTeX
@article{Lin2026,
  author = {Lin, Yiteng and Su, Qingtian and Matanmi, Fawas. O. and Yan, Xingfei and Gao, Shang},
  title = {Mechanical Behaviour and Parametric Analysis of the Hybrid Girder Bridges Joint Between Steel-Concrete Composite Girder and Prestressed Concrete Girder},
  journal = {Applied Sciences},
  year = {2026},
  volume = {16},
  number = {13},
  pages = {6322},
  doi = {10.3390/app16136322}
}
Kostenlos starten →