Immediate and Long‐Term Pull‐Out Bond Strength of 3D‐Printed Provisional Crowns
BioMed Research International · 2024
DOI: 10.1155/2024/7205011 ↗Kurz gefasst
Fachartikel in der Zeitschrift BioMed Research International, 2024. Verfasst von Joyce R C Dos S Siqueira und 4 weiteren Autor:innen. Beteiligte Einrichtung: Department of Dental Materials and Prosthodontics São Paulo State University (UNESP) Institute of Science and Technology, São José dos Campos 12245-0…. Hauptthemen laut MEDLINE: Printing, Three-Dimensional, Crowns, Tensile Strength. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Background
Over the past decade, 3D printing technology has revolutionized various fields, including dentistry. Provisional restorations play a crucial role in prosthetic rehabilitation, necessitating the evaluation of their bond strength with different provisional cement agents.
Aims
This study is aimed at assessing the immediate and long‐term bond strength of 3D‐printed dental crowns using three provisional cement agents. Materials and Methods: Provisional crowns ( N = 36) were manufactured using 3D modeling software and cemented in dentin analogues (G10 Nema resin). After the crowns’ fabrication, they were randomly divided into three groups ( n = 12) for cementation with Relyx Temp 3M ESPE, Provicol—VOCO, and Meron—VOCO. Tensile strength tests were conducted using a universal testing machine, with half of the specimens subjected to 2000 thermal cycles before testing. Finite element analysis was employed to assess tensile stress distribution.
Results
Statistical analysis (two‐way ANOVA and Tukey’s test at a 95% confidence level) revealed significant effects of cement type ( p = 0.006) and thermal aging ( p = 0.001) on bond strength. Glass ionomer cement exhibited the highest immediate resistance, while all types of cement were adversely affected by thermal aging, resulting in decreased bond strength.
Conclusion
Thermal aging significantly alters the properties of 3D printing resin and affects the bond strength of provisional cement with 3D‐printed crowns. Despite the adverse effects of thermal aging, glass ionomer cement demonstrated the highest immediate resistance. Clinicians should carefully consider these findings when selecting provisional cements for 3D‐printed crowns.
Schlagwörter
MeSH-Schlagwörter (MEDLINE)
Substanzen
Autor:innen und Institutionen
- Department of Dental Materials and Prosthodontics São Paulo State University (UNESP) Institute of Science and Technology, São José dos Campos 12245-000, Brazil.
- Department of Reconstructive Oral Care Academic Centre for Dentistry Amsterdam (ACTA) 1081 LA, Amsterdam, Netherlands.
ORCID-Profile: Nathalia de C Ramos, Marco A Bottino, João P M Tribst
Zitieren
APA
Dos S Siqueira, J. R. C., Rodriguez, R. M. M., de C Ramos, N., Bottino, M. A., & Tribst, J. P. M. (2024). Immediate and Long‐Term Pull‐Out Bond Strength of 3D‐Printed Provisional Crowns. BioMed Research International. https://doi.org/10.1155/2024/7205011
Vancouver
Dos S Siqueira JRC, Rodriguez RMM, de C Ramos N, Bottino MA, Tribst JPM. Immediate and Long‐Term Pull‐Out Bond Strength of 3D‐Printed Provisional Crowns. BioMed Research International. 2024. doi:10.1155/2024/7205011
BibTeX
@article{DosSSiqueira2024,
author = {Dos S Siqueira, Joyce R C and Rodriguez, Rita M M and de C Ramos, Nathalia and Bottino, Marco A and Tribst, João P M},
title = {Immediate and Long‐Term Pull‐Out Bond Strength of 3D‐Printed Provisional Crowns},
journal = {BioMed Research International},
year = {2024},
doi = {10.1155/2024/7205011}
}
EUVIMED