EUVIMEDEUVIMED entdecken
Crossref

Comparison of retention of monolithic zirconia crowns with alumina airborne-particle abraded and nonabraded intaglio using three different cements: A clinical simulation

Jennifer S Emerson, Glen H Johnson, Mats H Kronström

The Journal of Prosthetic Dentistry · 2024

DOI: 10.1016/j.prosdent.2023.09.018 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The Journal of Prosthetic Dentistry, 2024. Verfasst von Jennifer S Emerson und 2 weiteren Autor:innen. Beteiligte Einrichtung: Private practice, Kenmore, Wash. Hauptthemen laut MEDLINE: Dental Materials, Aluminum Oxide. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 24 Literaturangaben.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

STATEMENT OF PROBLEM: The necessity of roughening the intaglio surface of zirconia crowns to achieve adequate retention is unclear. PURPOSE: The purpose of this clinical simulation study was to evaluate the retention of airborne-particle-abraded and nonabraded monolithic zirconia crowns using 3 different cement types. MATERIAL AND METHODS: Extracted human molars were used and prepared with a 10-degree taper. Impressions were made of the prepared teeth with a polyvinyl siloxane (PVS) material, and dies were made with Type 4 gypsum. Each die was scanned with a NobelProcera 1G Scanner, and the standard tessellation language (STL) files were transferred electronically to the Nobel Biocare production site, where a bar was added virtually on top of each crown and parameters were set for milling. Seventy-two Procera zirconia crowns were generated, of which half were airborne-particle abraded on the intaglio surface with 50-µm alumina particles at 400 to 500 kPa for 15 seconds. The other 36 received no intaglio treatment other than cleaning. Both groups of 36 crowns were divided into 3 subgroups of 12 specimens. The area of each preparation was calculated using a computer-aided design software program. The specimens were distributed to attain similar mean surface areas among the cementation groups. The crowns were cemented onto the specimen with a controlled force of 196 N. The 3 cements used were self-adhesive, modified resin RelyX Unicem Aplicap, resin-modified glass ionomer RelyX Luting, and a composite resin, Panavia F2.0 with ED Primer A & B. All specimens were thermocycled (5 °C to 55 °C) for 5000 cycles and then removed axially with a universal testing machine (Instron Model 5585H) at a crosshead speed of 0.5 mm/min. The removal force was recorded, and stress of dislodgement was calculated for each crown. A 2-way analysis of variance was used for statistical analyses. The type of failure was analyzed with the chi-squared test of association for independent samples (α=.05 for all tests). RESULTS: The mean dislodging force for crowns with airborne-particle abraded intaglio was 5.4 MPa, which was statistically greater than the mean of 3.2 MPa for nonabraded specimens (P 50% of specimens) was at least three-fourths of the cement remaining within the crown.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

Dental MaterialsAluminum OxideHumansDental CementsCrownsResin CementsZirconiumGlass Ionomer CementsMaterials TestingDental Stress AnalysisSurface Properties

Substanzen

Dental Materialszirconium oxideAluminum OxideDental CementsResin CementsZirconiumGlass Ionomer Cements

Autor:innen und Institutionen

  • Private practice, Kenmore, Wash.
  • Professor, Department of Restorative Dentistry, University of Washington School of Dentistry, Seattle, Wash.
  • Professor, Department of Restorative Dentistry, University of Washington School of Dentistry, Seattle, Wash. Electronic address: mk33@uw.edu.

Zitieren

APA

Emerson, J. S., Johnson, G. H., & Kronström, M. H. (2024). Comparison of retention of monolithic zirconia crowns with alumina airborne-particle abraded and nonabraded intaglio using three different cements: A clinical simulation. The Journal of Prosthetic Dentistry. https://doi.org/10.1016/j.prosdent.2023.09.018

Vancouver

Emerson JS, Johnson GH, Kronström MH. Comparison of retention of monolithic zirconia crowns with alumina airborne-particle abraded and nonabraded intaglio using three different cements: A clinical simulation. The Journal of Prosthetic Dentistry. 2024. doi:10.1016/j.prosdent.2023.09.018

BibTeX
@article{Emerson2024,
  author = {Emerson, Jennifer S and Johnson, Glen H and Kronström, Mats H},
  title = {Comparison of retention of monolithic zirconia crowns with alumina airborne-particle abraded and nonabraded intaglio using three different cements: A clinical simulation},
  journal = {The Journal of Prosthetic Dentistry},
  year = {2024},
  doi = {10.1016/j.prosdent.2023.09.018}
}
Kostenlos starten →