EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

On the Effect of the Stress Ratio on Fatigue Properties of Ti-6Al-4V Produced by Laser Powder Bed Fusion

A. Cutolo, C. Elangeswaran, B. Van Hooreweder

Material Design & Processing Communications · 14.02.2022 · 2022 · 1-7

DOI: 10.1155/2022/3530603 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Material Design & Processing Communications, erschienen am 14.02.2022. Verfasst von A. Cutolo und 2 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 27 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VLAIO, SIM.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Fatigue life estimation of Ti-6Al-4V parts produced by additive manufacturing (AM) technologies has received increasing interest during the last decade. Recent studies focused mostly on the fatigue performance of Ti-6Al-4V considering a fixed stress ratio ( R ), usually 0.1 or −1. However, in order to properly design structural components subjected to variable loads, the effect of different stress ratios on the fatigue performance has to be carefully investigated. This research studies the stress ratio influence on the fatigue properties of Ti-6Al-4V specimens produced by laser powder bed fusion (L-PBF). Miniaturized Ti-6Al-4V samples were tested with the step procedure for different R values. A constant life Haigh's diagram ( 2 · 1 0 6 cycles) was generated for L-PBF Ti-6Al-4V in as-built, electro-polished, and machined surface condition. The results present for the first time the relations between alternating and mean stresses for L-PBF Ti-6Al-4V with a fine α + β microstructure when different surface posttreatments are used to enhance the coupons’ final surface quality.

Förderung

  • VLAIO
  • SIM

Zitieren

APA

Cutolo, A., Elangeswaran, C., & Hooreweder, B. V. (2022). On the Effect of the Stress Ratio on Fatigue Properties of Ti-6Al-4V Produced by Laser Powder Bed Fusion. Material Design & Processing Communications, 2022, 1-7. https://doi.org/10.1155/2022/3530603

Vancouver

Cutolo A, Elangeswaran C, Hooreweder BV. On the Effect of the Stress Ratio on Fatigue Properties of Ti-6Al-4V Produced by Laser Powder Bed Fusion. Material Design & Processing Communications. 2022;2022:1-7. doi:10.1155/2022/3530603

BibTeX
@article{Cutolo2022,
  author = {Cutolo, A. and Elangeswaran, C. and Hooreweder, B. Van},
  title = {On the Effect of the Stress Ratio on Fatigue Properties of Ti-6Al-4V Produced by Laser Powder Bed Fusion},
  journal = {Material Design & Processing Communications},
  year = {2022},
  volume = {2022},
  pages = {1--7},
  doi = {10.1155/2022/3530603}
}
Kostenlos starten →