EUVIMEDEUVIMED entdecken
Open Access · CC BY-NC-ND 4.0

Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion

David Melle, Etienne Pessard, Franck Morel, Daniel Bellett, Frédéric Adamski, Rene Billardon

Fatigue & Fracture of Engineering Materials & Structures · 2024-12 · 47 (12) · 4498-4515

DOI: 10.1111/ffe.14392 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Fatigue & Fracture of Engineering Materials & Structures, online erschienen am 16.09.2024. Verfasst von David Melle und 5 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC-ND 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study focuses on the evolution of the fatigue strength of Laser Powder Bed Fusion (L‐PBF) produced Ti‐6Al‐4V as a function of the chemical etching finishing process. The aim is to identify the critical fatigue crack initiation mechanisms and the transitions between them in terms of the evolution of the surface micro‐geometry. This is done using three different geometries and six different surface states. The evolution of the crack initiation mechanisms is then used to explain the evolutions of the fatigue strength and the fatigue scatter. Chemical etching affects the fatigue life via a polishing effect, which directly influences both the finite and the high cycle fatigue domains. It is shown that chemical etching makes it possible to obtain fatigue strengths that are almost similar to those of the machined surface. However, it is also observed that etching cannot fully counteract the effects of large surface cavities caused by surface connected porosities.

Zitieren

APA

Melle, D., Pessard, E., Morel, F., Bellett, D., Adamski, F., & Billardon, R. (2024). Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures, 47(12), 4498-4515. https://doi.org/10.1111/ffe.14392

Vancouver

Melle D, Pessard E, Morel F, Bellett D, Adamski F, Billardon R. Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion. Fatigue & Fracture of Engineering Materials & Structures. 2024;47(12):4498-4515. doi:10.1111/ffe.14392

BibTeX
@article{Melle2024,
  author = {Melle, David and Pessard, Etienne and Morel, Franck and Bellett, Daniel and Adamski, Frédéric and Billardon, Rene},
  title = {Effect of chemical etching time on the fatigue behavior of Ti‐6Al‐4V produced by laser powder bed fusion},
  journal = {Fatigue & Fracture of Engineering Materials & Structures},
  year = {2024},
  volume = {47},
  number = {12},
  pages = {4498--4515},
  doi = {10.1111/ffe.14392}
}
Kostenlos starten →