EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mechanical Properties and Degradation Behaviors of Zn-xMg Alloy Fine Wires for Biomedical Applications

Jing Bai iD, Yan Xu, Qizhou Fan, Ruihua Cao, Xingxing Zhou, Zhaojun Cheng, Qiangsheng Dong, Feng Xue iD

Scanning · 24.12.2021 · 2021 · 1-12

DOI: 10.1155/2021/4831387 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Scanning, erschienen am 24.12.2021. Verfasst von Jing Bai und 7 weiteren Autor:innen. Beteiligte Einrichtung: Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China. Hauptthemen laut MEDLINE: Alloys, Zinc. Die Arbeit wurde bisher 24-mal zitiert (Crossref) und nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Jiangsu Key Laboratory for Advanced Metallic Materials, Technological Innovation of Key Industry of Suzhou, Science and Technology Project of Jiangsu Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Zn and Zn-based alloys exhibit biosafety and biodegradation, considered as candidates for biomedical implants. Zn-0.02 wt.% Mg (Zn-0.02 Mg), Zn-0.05 wt.% Mg (Zn-0.05 Mg), and Zn-0.2 wt.% Mg (Zn-0.2 Mg) wires (Φ 0.3 mm) were prepared for precision biomedical devices in this work. With the addition of Mg in Zn-xMg alloys, the grain size decreased along with the occurrence of Mg2Zn11 at the grain boundaries. Hot extrusion, cold drawing, and annealing treatment were introduced to further refining the grain size. Besides, the hot extrusion and cold drawing improved the tensile strength of Zn-xMg alloys to 240-270 MPa while elongation also increased but remained under 10%. Annealing treatment could improve the elongation of Zn alloys to 12% -28%, but decrease the tensile strength. Furthermore, Zn-xMg wires displayed an increase in degradation rate with Mg addition. The findings might provide a potential possibility of Zn-xMg alloy wires for biomedical applications.

Schlagwörter

MeSH-Schlagwörter (MEDLINE)

AlloysZincBiocompatible MaterialsCorrosionMaterials TestingTensile Strength

Substanzen

AlloysBiocompatible MaterialsZinc

Autor:innen und Institutionen

  • Jiangsu Key Laboratory for Advanced Metallic Materials, School of Materials Science and Engineering, Southeast University, Nanjing 211189, China.
  • Institute of Medical Devices (Suzhou), Southeast University, Suzhou 215000, China.
  • Jiangsu Key Laboratory of Advanced Structural Materials and Application Technology, School of Materials Science and Engineering, Nanjing Institute of Technology, Nanjing 211167, China.

ORCID-Profile: Jing Bai, Feng Xue

Förderung

  • Jiangsu Key Laboratory for Advanced Metallic Materials
  • Technological Innovation of Key Industry of Suzhou
  • Science and Technology Project of Jiangsu Province
  • National Natural Science Foundation of China
  • National Key Research and Development Program of China

Zitieren

APA

Bai, J., Xu, Y., Fan, Q., Cao, R., Zhou, X., Cheng, Z., Dong, Q., & Xue, F. (2021). Mechanical Properties and Degradation Behaviors of Zn-xMg Alloy Fine Wires for Biomedical Applications. Scanning, 2021, 1-12. https://doi.org/10.1155/2021/4831387

Vancouver

Bai J, Xu Y, Fan Q, Cao R, Zhou X, Cheng Z, et al. Mechanical Properties and Degradation Behaviors of Zn-xMg Alloy Fine Wires for Biomedical Applications. Scanning. 2021;2021:1-12. doi:10.1155/2021/4831387

BibTeX
@article{Bai2021,
  author = {Bai, Jing and Xu, Yan and Fan, Qizhou and Cao, Ruihua and Zhou, Xingxing and Cheng, Zhaojun and Dong, Qiangsheng and Xue, Feng},
  title = {Mechanical Properties and Degradation Behaviors of Zn-xMg Alloy Fine Wires for Biomedical Applications},
  journal = {Scanning},
  year = {2021},
  volume = {2021},
  pages = {1--12},
  doi = {10.1155/2021/4831387}
}
Kostenlos starten →